ZWM-0320 Rubber Seal Ring Performance Testing Machine

Product Introduction 1. Overview ZWM-0320 Rotary Seal Ring Performance Testing Machine is a variable frequency speed regulation, mechanical transmission, electronic control type machine used for performance testing of internal skeleton and assembled rotary shaft lip seals

1、 Overview

ZWM-0320 rotary sealing ring performance testing machine is a variable frequency speed regulation, mechanical transmission, electronic control type, used for performance testing of internal skeleton and assembled rotary shaft lip seals.

The sample is mounted on the sample shaft, and according to the specified requirements, a certain speed, test temperature, and specified pressure are set. After a certain period of operation, the sealing ring is observed for leakage, and the product quality is grasped based on relevant data. It is one of the inseparable testing equipment in the sealing ring manufacturing industry.

2、 Main technical parameters

2.1 Spindle speed: 0-6000r/min (adjustable)

2.2 Speed error: ± 0.5%

2.3 Spindle runout error:<± 0.03mm

2.4 Adjustable offset of installation disk: 0-0.5mm

2.5 Power supply: AC380V three-phase four wire system Power: 2.2KW

2.6 This testing machine can perform forward and reverse rotation tests

2.7 Oil seal test maximum outer diameter size 200mm

2.8 Electrical appliances are controlled by a programming system

2.9 This testing machine can be set to operate with gaps and accumulate timing

2.10 Dimensions: 1100 × 880 × 1300 (mm)

2.11 The maximum heating temperature of this testing machine is 200 degrees Celsius, and the air pressure can be adjusted