ZK-NIP1 multifunctional negative oxygen ion detector

NegotiableUpdate on 08/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ZK-NIP1 multifunctional negative oxygen ion detector

Product Details

This device is designed based on the concept of portable and online integration. Using high-precision sensors and metal enclosures, it can measure negative oxygen ions in real time PM2.5、 Temperature and humidity. This device can support long-term online use or temporary measurement. It can be used as an online device or as a portable device.

Display panel: Negative oxygen ions can be seen on the panel PM2.5、 Temperature and humidity.

Handle: Easy to carry and move.

Power interface: This interface is used to supply power to the device. If it is fixed outdoors for a long time, it needs to be connected to this power supply. Otherwise, the ion battery inside the instrument will be depleted and cannot be used. If used temporarily outdoors, no external power supply is required (approximately 3 hours of operation). Regardless of whether the device is turned on or not, as long as the designated power charger is plugged in, the red light will light up to indicate that it is charging, and the green light will indicate that it is fully charged.

Ventilation motor: When the equipment is turned on for use, the ventilation motor of the equipment starts working to correct data and ventilate the equipment.

Power switch: The power switch of the device. When turned on, the device starts working, and when turned off, it stops.

RS232 port: This interface is used to connect with the computer's COM port (built-in or USB to COM port, etc.), so that the uploaded data can be viewed on the client side.

RS485 port: This interface can be used to connect to the customer's own system, and the device automatically sends data through this interface, but does not receive data.

USB interface: This interface can be inserted into a USB drive to write measured data to the USB drive.

The first method, namely USB flash drive mode, can be directly inserted into a USB flash drive for use (do not plug or unplug with power on).
The second method is the computer direct connection mode, which requires the computer to have an RS232 interface or a USB to RS232 data cable.
The third method is that the device can be used as an online sensor. If it is used online for a long time, please disconnect the power switch of the device.
Multiple methods can be used in combination, and all three modes can be customized or combined arbitrarily

One year warranty and lifetime maintenance

Regular phone follow ups to promptly resolve any issues discovered

24/7 consultation and feedback

When the phone cannot be resolved, the technical engineer will provide remote service

Pay an appropriate fee annually to enjoy on-site maintenance, upkeep, and cost price repair and replacement