- Phone
-
Address
No. 139, Lvke Road, Pudong New Area, Shanghai
Product Categories
Chongqing Chuanyi Automation Co., Ltd
Yokogawa AXG electromagnetic flowmeter
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Yokogawa AXG electromagnetic flowmeter ADMAG TI (Total Insight) series AXG electromagnetic flowmeter is a high-quality and highly reliable product developed based on Yokogawa Electric's years of experience and successful cases. For example, Yokogawa Electric's proprietary dual frequency excitation method can improve application performance.
Product Details
Yokogawa AXG electromagnetic flowmeter主要口径为： AXG002、AXG005、AXG010、AXG025、AXG032、AXG040、AXG050、AXG065、AXG080、AXG100、AXG125、AXG150、AXG200
Product Features
1. Stable measurement
Using Yokogawa Electric's dual frequency excitation method, even for high concentration mud, orStable flow measurement can also be achieved under high fluid noise conditions.
2. Multiple inputs and outputs
Multiple options for input/output of 4 current, pulse, and status signals. makeBy inputting temperature, mass or heat calculation results can also be obtained.
3. Improvement of operation and monitoring functions
You can choose to ensure safe operation priority settings and process data trends
7. Display, monitor backlight flicker (detection) function, and memory with display unit orThe data storage/recovery function of microSD memory cards.
8. Maintenance performance improvement
It has self diagnostic function, which helps with preventive maintenance of the factory. No need for itRemove the instrument (with verification function) from the piping to perform equipment diagnosis and passMonitor fluid noise and fluid conductivity for process condition detection and electrode isolationDiagnosis of aging, electrode fouling, and wiring connection.
Yokogawa AXG electromagnetic flowmeterProcess connection:
The available process connection methods include clamping type, flange type, combination joint type (screw type, welding type), clamp type, joint type, and butt welding head type. havePlease provide the lining and caliber range that can be used in conjunction with these connection methodsRefer to "Limitations on Specification Selection".
Clamping type:
ASME Class 150、Class 300
EN PN10、PN16、PN40
JIS F12、10K、20K
JPI Class 150
Flange type:
ASME Class 150、Class 300、Class 600
EN PN10、PN16、PN40
JIS F12、10K、20K
JPI Class 150
AS Table D、Table E
Joint type:
Screw type:
1/4 NPT (for calibers 2.5~5 mm (0.1~0.2 in.))
3/8 NPT (for caliber 10 mm (0.4 in.))
R 1/4 (for calibers 2.5~5 mm (0.1~0.2 in.))
R 3/8 (for caliber 10 mm (0.4 in.))
Welding type:
Outer diameter of welded joint:
18.5 mm/0.73 in. (for calibers 2.5~5 mm (0.1~ 0.2 in.))
22.5 mm/0.89 in. (for caliber 10 mm (0.4 in.))
Clamp type:
Tri-Clamp
DIN 32676 clamp
ISO 2852/SMS 3016 clamp
ISO 2852 clamp (for JIS G3447 pipes)
Joint type:
DIN 11851 connector
ISO 2853 connector
SMS 1145 connector (slotted packaging type)
ISO 2853 connector (for JIS G3447 pipes)
For welding head types:
DIN 11850 pipe butt welding joint
ISO 2037 Pipeline Welding Joints
JIS G3447 Pipe Welding Joint
Liquid receiving part:
Lining material:
Fluorocarbon PFA lining, ceramic tubeAluminum oxide ceramics (99.8%)
Electrode material:
Stainless steel 316L, nickel alloy (*), platinum iridium alloy, tantalum, titanium, tungsten carbidePlatinum alumina ceramics
ASTM B574 UNS N10276 or ASME SB-574 UNS N10276
