Yintai linear guide rail selection, MSA65S overload guide rail, Anang Mall one-stop service

Yintai linear guide rail selection, MSA65S overload guide rail, Anang Mall one-stop service
Yintai guide railAdvantages and Applications
The advantages of Yintai guide rails greatly improve the productivity of machine tools and play a significant role in mechanical machine equipment. Yintai guide rails are widely used and have the following characteristics:
1. High positioning accuracy
When using a linear guide as a linear guide, due to the rolling friction mode of the linear guide, not only does the friction coefficient decrease to 1/50 of the sliding guide, but the difference between the dynamic friction force and the static friction force also becomes very small. Therefore, when the bed is running, there will be no slipping phenomenon, and the positioning accuracy can reach μ m level.
2. Low wear can maintain accuracy for a long time
Traditional sliding guidance inevitably leads to poor platform motion accuracy due to grease reflux, and insufficient lubrication during motion causes wear on the contact surface of the running track, seriously affecting accuracy. The wear of rolling guidance is very small, so the machine can maintain accuracy for a long time.
3. Suitable for high-speed motion and significantly reduces the required driving horsepower of the machine
Due to the very low friction force during the movement of the Yintai guide rail, only a small amount of power is needed to make the bed run, especially when the working mode of the bed is frequent back and forth operation, which can significantly reduce the power loss of the machine. And due to its low heat generated by friction, it can be suitable for high-speed operation.
4. Can withstand loads in all directions simultaneously
Due to the special constraint structure design of linear guides, they can simultaneously withstand loads in the up, down, left, and right directions, unlike sliding guides that can withstand lighter lateral loads in the direction of parallel contact surfaces, which can easily cause poor operating accuracy of the machine.
5. Easy assembly and interchangeability
When assembling Yintai rails, simply mill or grind the assembly surface of the rails on the table, and follow the recommended steps to fix the rails and sliders to the machine with specific torque, which can reproduce the high precision during processing. Traditional sliding guidance requires scratching the running track, which is both laborious and time-consuming, and once the machine accuracy is poor, it must be scratched again. Linear guides have interchangeability, allowing for the replacement of sliders, guides, or even linear guide groups separately, allowing the machine to regain high-precision guidance.