Yintai guide rail model, MSA30E overload type, Anang Mall one-stop service

Yintai guide rail model, MSA30E overload type, Anang Mall one-stop service

Yintai guide railadvantage
High work accuracy
Yintai guide railThe motion is achieved through rolling, which not only reduces the friction coefficient to 1/50 of the sliding guide rail, but also reduces the difference between dynamic and static friction resistance, achieving smooth motion, reducing impact and vibration, and avoiding crawling phenomena. Therefore, it can achieve UM level feed and positioning accuracy, which is beneficial for improving the response speed and sensitivity of the data control coefficient.
Significantly reduce the driving rate
due toYintai guide railThe friction force is very small during movement, and only a small amount of power is needed to make the machine move. The power loss of the machine is significantly large, and the heat generated by friction is minimal. It is suitable for high-speed, frequent starting and reversing of moving parts.
Simple lubrication structure
Yintai guide railThere is an oil cup installed on the slider, which can directly inject grease with oil or connect to an oil supply pipe for automatic lubrication of the machine, reducing its wear and allowing the machine to maintain precision for a long time.
Strong dustproof and sealing ability
Yintai guide railGood dust-proof performance, the slider is equipped with sealed end caps at both ends, and a sealing film can be selected at the bottom. At the same time, the fixing screw holes of the slide rail are equipped with dust-proof screw hole covers to prevent dust accumulation, thereby ensuring the service life and performance of the product.
Easy installation and easy interchangeability
Due to the use of precision machining technology, the straightness of the slide rail is high, the installation screw hole error in the slide rail is small, and the installation is convenient. The linear guide rail has interchangeability, and the slider or slider or even the linear guide rail can be replaced separately, which can enable the machine to achieve high precision again.
High carrying capacity. Strong rigidity
Yintai guide railAdopting Gothic style four point contact design and reasonable ratio of circular arc grooves, not only does it reduce contact stress, but also greatly improves load capacity and stiffness compared to V-shaped flat ball point contact. Due to the symmetrical four point confinement of the copper ball, it can simultaneously bear loads from all directions around it, and there is almost no displacement phenomenon, resulting in stronger rigidity and higher precision.