YSRD-1 Fully Automatic Combustible Liquid Spontaneous Combustion Point Tester

YSRD-1 Fully Automatic Combustible Liquid Spontaneous Combustion Point Tester

Instrument Introduction

YSRD-1 Fully Automatic Combustible Liquid Spontaneous Combustion Point TesterIt is designed and manufactured according to the requirements of GBT 5332-2007 Test Method for Ignition Temperature of Combustible Liquids and Gases and GBT 21860-2008 Test Method for Spontaneous Combustion Temperature of Liquid Chemicals. Suitable for determining the self ignition point temperature of fire-resistant oil in the speed control system of generators above 30MW, as well as the self ignition point of other special oils, but cannot detect the ignition temperature of gases.

Technical specifications

1. Working power supply: AC220V ± 10% 50Hz

2. According to standards: GBT 5332-2007 or GBT21860-2008 or DL/T7061999

3. Display mode: 10 inch industrial grade color LCD touch screen, fully Chinese operation interface

4. Operating System: Embedded Windows System

5. Control system: Mitsubishi PLC system, built-in 16 sets of control programs

6. Temperature control range: 80 ℃~800 ℃ Display accuracy: 0.1 ℃

7. Detection accuracy: repeatability ≤ 10 ℃, reproducibility ≤ 20 ℃

8. Data input: Touch screen data input, which can input Chinese, English, numbers, punctuation, symbols, etc

9. Data output: Micro thermal printer, automatic printing, fast printing

10. Data Storage: Automatically stores 100 measurement results, which can be viewed at any time

11. Instrument dimensions: length, width, and height 550 × 500 × 700 (mm)

12. Instrument weight: around 60KG

13. Environmental temperature: 5 ℃~30 ℃

14. Relative humidity: 30-80% RH

Instrument Introduction

1The instrument has a high degree of automation, with automatic temperature control, automatic sampling, automatic timing, automatic detection, and automatic printing of results.

2. Adopting microcomputer control technology and embedded 10 inch industrial grade color LCD touch screen.

3. Metal bath with constant temperature, fast heating speed, and no pollution.

4. The precision injection pump automatically adds samples, with a standard injection volume that can be set.

5. Automatically blow clean the flask after each sample addition.

6. Driven by a stepper motor, it has the characteristics of high precision and long service life.

7. The photoelectric detection method automatically detects the self ignition point with high detection sensitivity.

8. Built in micro thermal printer that can automatically report detection results.

9. 16 sets of measurement parameters can be preset for selection when measuring different samples.

10. The design and manufacturing comply with national standards, and the instrument program can be upgraded when the standards are revised.