YSI MultiLab 4010-1W Multi Parameter Water Quality Measuring Instrument from the United States

YSI MultiLab 4010-1W Multi Parameter Water Quality Measuring Instrument from the United StatesProduct Introduction:

The YSI MultiLab 4010-1W multi parameter water quality measuring instrument is used to measure pH, ORP, single channel inputs based on optical DO/BOD or conductivity. This single channel instrument provides easy-to-use and easy to calibrate menu driven operation, with a large display screen that is easy to read and an intelligent digital sensor (IDS) for wireless or plug and play connectivity.

The YSI MultiLab series allows you to customize single channel, dual channel, and triple channel instruments to meet your application needs. MultiLab is a series of flexible desktop instruments that can measure up to 25 different parameters and connect up to three sensors simultaneously, helping you simplify your laboratory.

The IDS sensor automatically stores its only serial number and calibration data. Sensors retain their calibration data when moving from one instrument to another and transmit this information to the new instrument, so you do not need to recalibrate. In addition, they also process measurement signals digitally.

The CMC function displays continuous monitoring of the sensor measurement range. The range is represented by a bar, and the calibration point is displayed as a vertical line at the calibration point. The moving cursor will display the current measurement value and indicate whether the measurement value is within the calibration range. QSC is a system used to monitor pH, electricity, and status. Perform initial calibration, then monitor sensor status and display it graphically.

QSC is a system used to monitor pH, electricity, and status. Perform initial calibration, then monitor sensor status and display it graphically.

YSI 4010-1W single parameter water quality analyzer is a laboratory instrument used for measuring DO/BOD, pH, ORP, and conductivity. The EPA has approved the drinking water and wastewater compliance report.

Connect the digital IDS sensor to MultiLab 4010-1W to measure DO/BOD, pH, ORP, and conductivity.

Only instruments. Cables, probes/sensors, and accessories are sold separately.

YSI MultiLab 4010-1W Multi Parameter Water Quality Measuring Instrument Product Features:

Single channel input

pH，ORP， Optical based DO/BOD, conductivity

Optical and membrane covered BOD

Wireless sensor compatibility within a range of 30 feet (10m)

data storage

500 datasets in manual mode

5000 datasets in automatic recording mode

Large backlit graphic display

Compliant with GLP (Sensor Storage Serial Number and Calibration Data)

USB connection for managing data

YSI MultiLab 4010-1W Multi Parameter Water Quality Measuring Instrument from the United StatesTechnical Specifications:

DO: 0-50 mg/L, 0-20 mg/L; ± 2% of the reading or 0.2 milligrams per liter, whichever is greater;

20-50 milligrams per liter: ± 6% of the reading

PH：0-14; ±0.2

Conductivity: 0-200 milliSiemens per centimeter; ± 0.5% of the reading or 0.001 milliSiemens per centimeter, whichever is greater (4-meter cable);

± 1% of the reading or 0.001 milliSiemens per centimeter, whichever is greater (20 meter cable)

ORP: -1500 to+1500 millivolts; ± 20 millivolts

Ordering instructions:

When purchasing instruments, please note that the instrument host, cables, and probe sensors are sold separately.

YSI MultiLab 4010-1W multi parameter water quality measuring instrument probe sensor from the United States:

YSI 4010-1W Multi Parameter Water Quality Analyzer

BOD adapter YSI4011

BOD probe YSI4100

PH temperature sensor YSI4110

ORP probe YSI4211

Conductivity probe YSI4310

Fluorescent dissolved oxygen probe YSI4410