YRT-3 melting point meter

NegotiableUpdate on 02/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

According to the pharmacopoeia's regulations on melting point determination, the sample should be placed in a transfer solution when the liquid temperature is about 10 ℃ lower than its melting point value, and then heated at a constant rate as required by the pharmacopoeia until the sample melts. Therefore, the YRT-3 melting point meter is equipped with a temperature preset function, which can control the temperature at the preset temperature

Product Details

Performance characteristics:
Yrt- 3The melting point meter has real-time temperature display function and recording keys for initial and final melting points, which can record the melting point values in the initial and final melting states.
According to the pharmacopoeia's regulations on melting point determination, the sample should be tested at a liquid temperature below its melting point value by approximately10℃Add a temperature transfer solution and then raise the temperature at a constant rate as required by the pharmacopoeia until the sample melts.
for thisYrt- 3The melting point meter is equipped with a temperature preset function, which can control the temperature at the preset temperature.
The preset value that has been recorded for this shutdown is saved, and the preset temperature for the next startup will be the preset value for this shutdown.
After reaching the preset temperature, the delay is about1Minute, keep the liquid in a stable temperature state, and the buzzer will prompt.
When the sample melts, the initial melting point and final melting point values can be recorded using the initial melting and final melting keys
Yrt- 3The melting point meter has three working states: reset state, temperature control state, and startup test state
The initial melting point bond and final melting point bond can also be used to measure the melting points of two samples. The initial melting point records the melting point value of one sample, and the final melting point is recorded
Record the melting point value of another sample.
Technical Specifications:

Melting point measurement range: from room temperature to270℃

Heating rate:0.5℃/divide 1.0℃/divide 1.5℃/divide 3.0℃/Four levels per minute
Linear heating rate deviation:<5%

Melting point measurement accuracy: ＜200℃Time not exceeding±0.5℃ ＞200℃Time not exceeding±1.0℃

Temperature preset: from room temperature to270℃Any preset within the scope

Thermal medium: Methyl silicone oil

Stable transmission cup:250mlTall beaker

Environmental temperature for use:20℃±10℃

Power Supply:220V±10%Power<200Wfrequency50Hz

Continuous working time: greater than24hour

Overall dimensions ：320×180×300mm

weight ：8kg