YAMATO Laboratory Cleaning Machine AWD510

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Compliant with ISO15883 standard, the cleaning process can be distinguished by the color change of the illumination inside the groove

Product Details

Compliant with ISO15883 standard, the cleaning process can be distinguished by the color change of the illumination inside the groove.

■ Characteristics

Can be safely cleaned and disinfected.
The rinsing temperature can be set arbitrarily at around 93 ℃.
Sliding two-layer cleaning can meet a large amount of cleaning needs at once.
Thoroughly clean using the upper, middle, and lower rotating nozzles.
Automatic metering and automatic input of cleaning agents (liquid detergent).
Through spray cleaning, the interior of difficult to clean beakers and other containers can be thoroughly cleaned.
Drying (optional) is carried out using hot air filtered by a high-efficiency filter.
Hot water is cooled to below 60 ℃ before being discharged, and the drainage pipeline does not need to consider a heat-resistant circuit.
Adopting a Chinese color LCD touch screen, it is easy to operate.
The cleaning process can be confirmed through the LED lights on the front panel and the lighting inside the cleaning tank.
Adopting double-layer insulated glass windows, the surface will not heat up even when disinfected with hot water.
Adopting an electronic lock avoids accidentally opening the door during the cleaning process.
The injection bottle can also be easily cleaned, and there is a dedicated cleaning frame for injection bottle cleaning (optional).
According to the cleaning equipment, various cleaning racks (optional) and specialized cleaning agents are equipped.

Specifications:

model			AWD510
performance	cleaning method		Rotating nozzle spraying in the upper, middle, and lower sections
	Cleaning process		Pre cleaning, washing, rinsing, pure water rinsing
			※ Pre cleaning · Cleaning/Rinse temperature setting rangeOFF～80℃/93℃
	Hot water supply method		2KWheating
	Cleaning agent supply		Automatic metering and input (liquid detergent)
	drainage method		Forced drainage of the pump after hot water cooling
condition	Range of environmental temperature for use		5～40℃ (for indoor use only)
	Water supply connection	Tap water (mandatory)	5～25℃, water pressure0.1～0.5MPaBody side interfaceG3/4Water supply side interfaceG1/2
		Warm water (any)	5～60℃, water pressure0.1～0.5MPaBody side interfaceG3/4Water supply side interfaceG1/2
	cleaning agent		Special cleaning agent (purchased separately)
	Pure water connection (arbitrary)		0.02～0.1MPaWhen rinsing with pure water, the outer diameter of the hose connection is Φ10.5mm
structure	Exterior Decoration		Stainless steel plate（SUS304）
	built-in		Stainless steel plate（SUS316）
	foot		Horizontal adjustment foot
additional function			4.3Inch LCD touch screen/Process displayLED/Lighting color inside the groove by process
Safety function			Overcurrent leakage protection switch, temperature rise prevention, door lock, water leakage sensor
Inner groove size			wide500X deep480X high480mm
External dimensions			wide580X deep600X high845mm
weight			make an appointment87kg
power supply			single phaseAC220V 50/60Hz 14A
Accessories			Water supply hose, drainage hose, plug for removing upper cleaning rack, stainless steel rack for cleaning agent, drainage pipe clamp, overflow hose, cleaning agent hose