YA-2300 High Temperature and Humidity Meter

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The YA-2300 high temperature and humidity meter adopts imported polymer membrane (resistance capacitance method) sensor technology, with a temperature resistant design that can accurately measure long-term online flue gas humidity in high temperature and high humidity environments up to 180 ℃. Mainly used inside the analysis cabinet of the online smoke monitoring system (CEMS), the independent spiral heat tracing device inside can effectively prevent the condensation of low-temperature gases. It has the characteristics of high temperature resistance, high measurement accuracy, corrosion resistance, strong anti-interference ability, fast response speed, and stable and reliable performance.

Product Details

　　YA-2300 High Temperature and Humidity MeterApplication scenarios: Widely used for smoke humidity measurement in online analysis systems such as CEMS and VOC, and can also be applied for humidity measurement and control in wood, building materials, papermaking, chemical, pharmaceutical, fiber, textile, tobacco, vegetable, and food processing.

Note: If you encounter a low temperature, high humidity, and high dust environment, our company will provide you with a reasonable solution for smoke humidity.

Ordering Notice (Please specify when placing an order)

Use environmental conditions for heat tracing temperature (it is necessary to achieve full heat tracing throughout the process to avoid interference from temperature changes on humidity)

YA-2300高温湿度仪

Dimensions (mm):

YA-2300高温湿度仪

　　YA-2300 High Temperature and Humidity MeterTechnical features:

Measurement principle: Resistance capacitance method (imported Finnish Vaisala sensor)
Display mode: LED digital display
Measurement range: 0-40.0% VOL (volume percentage) can be converted to other units such as absolute humidity.
Resolution: 0.01%
Measurement accuracy: ＜ ± 1.5% FS
Repeatability: ＜ ± 1%
Response time: T90 ＜ 15S
Working temperature: Instrument: -20 ℃~+55 ℃
Test chamber: 0-180 ℃
Heat tracing type: automatic heat tracing
Sampling method: Cabinet extraction type (intake 8mm card sleeve connector, exhaust 6mm card sleeve connector)
Analog output: 4-20mA
Backend communication: RS485 (default) communication protocol can be customized
Power supply: 100-240VAC, 50Hz, power<40W
Protection: Test chamber material 316F (anti-corrosion coating applied inside the chamber)
Service life: Instrument>48 months, sensor>36 months (under normal usage conditions)
Installation method: Wall mounted installation (L100mm * H239mm)

Instrument features:
Wall mounted installation, easy to install, simple to operate, long service life, and easy to maintain;
Can be used for a long time in high temperature environments below 180 ℃;
Imported polymer membrane sensors with precise testing accuracy, stability, and corrosion resistance;
Test chamber material 316F, with anti-corrosion coating applied inside the chamber;
Test chamber design effectively avoids the influence of dust and liquid water on the humidity sensor;
High precision temperature automatic compensation eliminates the influence and interference of environmental temperature;