Welcome Customer !

Membership

Help

Xierko Trading (Shanghai) Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products
Product Categories

Xierko Trading (Shanghai) Co., Ltd

  • E-mail

  • Phone

  • Address

    1034 Zhongbang Business Park, Wangqiao Road, Pudong New Area, Shanghai

Contact Now

Xierke Advantage Supply Indu Sol 114090100 Switch

NegotiableUpdate on 05/06
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Xierke's advantage supply of Indu Sol 114090100 switch is actually a network splitter/measurement point (Network TAP), a non-traditional switch dedicated to interference free diagnostic monitoring of industrial networks.

Product Details

Xierke Advantage Supply Indu Sol 114090100 SwitchActually, it is a network splitter/measurement point (Network TAP), a non-traditional switch designed for interference free diagnostic monitoring of industrial networks.

Xierke Advantage Supply Indu Sol 114090100 SwitchThe main channels (P1-P2) adopt a hardware level direct pass design. Even if the equipment loses power or malfunctions, the electrical connection between P1 and P2 is still maintained, so that the production line network will not be interrupted. PROFINET IO communication has no impact on real-time requirements.

Shell and protection

Material: High strength engineering plastic shell, with excellent impact resistance and flame retardancy.

Protection level: IP20, specially designed for installation inside control cabinets, dustproof and finger proof.

Heat dissipation design: fanless passive heat dissipation structure, low power consumption (≤ 1W), long-term operation without overheating risk.

2. Connection interface

Port type: 4 front RJ45 interfaces (P1, P2, M1, M2).

P1/P2: Connect in series to the main network.

M1/M2: Connect diagnostic equipment (such as laptops or analyzers).

Contact reliability: Equipped with gold-plated RJ45 sockets, capable of withstanding over 1000 insertions and removals, ensuring connection stability in frequent debugging environments.

DIN rail installation: Standard 35mm DIN rail buckle design, stable installation, seismic resistance in accordance with IEC 60068-2-6 standard.

3. Internal circuit protection

Power protection: equipped with reverse polarity protection and overvoltage protection (maximum 28V) to prevent equipment damage caused by misconnection.

Signal isolation: The monitoring port is coupled with the main network through a transformer to achieve electrical isolation and avoid ground loop interference.

True 'Zero Interference' monitoring

Physical layer direct access: The main channels (P1-P2) adopt hardware level direct access design. Even if the equipment loses power or malfunctions, the electrical connection between P1 and P2 is still maintained to ensure the interruption of the production line network. This is something that ordinary switches with mirroring function cannot achieve (the network will be disconnected when the switch is powered off).

Nanosecond delay: The signal transmission delay is less than 1 bit (@ 100Mbps), which has no impact on PROFINET IO communication that requires real-time performance.

Full duplex bidirectional capture: simultaneously monitoring transmit (TX) and receive (RX) data without losing any direction of messages, including error frames and collision frames.

2. Protocol transparency and compatibility

Full protocol support: As a physical layer device, it is transparent to upper layer protocols. Supports all Ethernet based industrial protocols such as PROFINET, EtherNet/IP, Modbus TCP, OPC UA, etc.

Speed adaptive: Automatically adapts to 10/100 Mbps speeds without manual configuration, plug and play.

3. Integrated diagnosis and power supply

Built in power output: Provides a 24VDC/1A output port (UOUT) that can directly power connected laptops, Wireshark acquisition boxes, or Indu Sol analyzers, simplifying on-site wiring.

Indus Sol historical purchase models

124030010

114090100

200000003 Certificate of origin

110030011 MULTIrep X7 - Repeater 7-fa

ch

110030011 MULTIrep X7 -Repeater 7-fa

ch

114090200 iPNMA.

114090200 iPNMA

110030011 MULTIrep X7 - Repeater 7-fa

ch

110030011 MULTIrep X7 -Repeater 7-fa

ch

110030011 MULTIrep X7 - Repeater 7-fa

ch

200000003 Certificate of origin

114090200 iPNMA.

114090100,PNMA II

114090100, PNMA II

114090100, PNMA II

Advantages of Shanghai Xier Ke's agent brand

Ahlborn

AirCom

AK Regeltechnik

AK-NORD

ASA-RT

asphericon

Beck

Fischer

Fluidics

FSG

Fuhrmeister

Hauber Electronics

Hennig

Hoentzsch

Honsberg (Senseca)

Indu-Sol

Klaschka

LAG

Lambrecht

Lovato

Pantron

PMA

Proxitron

STEINCONNECTOR

Stoerk

WETRON

W&T

Winkelmann

Barksdale

Bauer

Funke

Hohner

Tiefenbach

SITEM

Storz

LAPPORT

the Dunker Engine

eDAQ

iKey

Bronkhorst

MANNER

EGE