XMGA-9000 Intelligent Light Column Display Regulator

function

1. Universal signal input, users can choose freely. (Thermocouple, Thermistor, Voltage, Current, Linear Resistance, Frequency).

2. The measured values and set values can be displayed using analog bars or digital screens, and the display content can be freely switched.

3. The measured value and the set value can be added or subtracted.

4. 8 alarm control modes to choose from.

5. Square opening and small signal resection can be performed.

6. The switch mode power supply instrument can have 5 switch outputs, one for the disconnection alarm of the input part, and the other 4 for positional control.

7. When there are faults such as broken resistance, broken coupling, or broken wire, the alarm relay can select the output state.

8. It can be used as a counter and reversible counter instrument. After power failure, it can restore the count value before power failure by re powering on. It can clear the count value, preset the number, and provide upper and lower limit alarms and transmission outputs for the count value.

9. Can achieve associated alarm control mode.

10. External 24V, 30mA or 50mA or 100mA power supply (can be used as a two-wire transmitter power supply).

11. Measurement value or internal given value transmission output: 0-10mA, 4-20mA, 0-5V, 1-5V, 0-10V.

12. We can provide RS485 asynchronous serial communication with multiple hosts, single host, and no host modes. Communication data verification follows the CRC-16 American data communication standard, with high reliability cycling and barcode verification.