Wood transverse compression elastic modulus fixture for artificial board measurement fixture

Wood transverse compression elastic modulus fixture for artificial board measurement fixture

Wood transverse compression elastic modulus fixture for artificial board measurement fixture

model：MC-TXML-13

application field

This fixture, in conjunction with a mechanical testing machine, is mainly used to determine the transverse compressive modulus of elasticity of solid wood panels.

meet the standard

GB/T 1927.13-2022Test method for physical and mechanical properties of flawless small sample wood13part:Determination of transverse compressive modulus of elasticity

Product advantages

1. Symmetrical structure, keep the readings on both sides as consistent as possible;

2. Installed with linear bearings to ensure verticality and smooth sliding up and down;

3. The pressure head and base have undergone quenching treatment, and the placement of the contact area is too soft, resulting in insufficient testing accuracy;

4. The base adopts an adjustable base, which can meet the testing requirements even if there is a slight deviation in the direction of downward pressure;

Technical specifications

Pressure head diameter: φ60mm

Hardness of the indenter: about50degree

Base diameter: φ100mm

Base hardness: approximately50degree

Maximum matching sample size:40*60*80mm

Measurement fixture spacing:10~30mm

Type of Linear Bearing: Stainless Steel

Matching instrument: dial gauge&dial indicator

Sample fixing method: screw clamping

Fixture material: stainless steel+45#Steel (quenched)+aluminum alloy

Matching equipment: Mechanical testing machine

Overall size: approximately100*270*150mm

Overall weight: approximately8kg

Product advantages

1. Symmetrical structure, keep the readings on both sides as consistent as possible;

2. Installed with linear bearings to ensure verticality and smooth sliding up and down;

3. The pressure head and base have undergone quenching treatment, and the placement of the contact area is too soft, resulting in insufficient testing accuracy;

4. The base adopts an adjustable base, which can meet the testing requirements even if there is a slight deviation in the direction of downward pressure;

Technical specifications

Pressure head diameter: 60mm

Hardness of the indenter: about 50 degrees

Base diameter: φ 100mm

Base hardness: about 50 degrees

Maximum matching sample size: 40 * 60 * 80mm

Measurement fixture spacing: 10-30mm

Type of Linear Bearing: Stainless Steel

Matching instruments: dial gauge&micrometer

Sample fixing method: screw clamping

Fixture material: stainless steel+45 # steel (quenched)+aluminum alloy

Matching equipment: Mechanical testing machine

Overall size: approximately 100 * 270 * 150mm

Overall weight: approximately 8kg