Wire and Cable Swinging and Twisting Testing Machine

Application of wire bending testing machine:

Wire and Cable Swinging and Twisting Testing MachineSuitable for plug leads, power cordsUSBCable, headphone cable, audio cable, headphone connectionBending or swinging tests of finished wire products such as wires. This machine fixes the wire on the fixture, adjusts the bending angle and testing speed of the wire, and adds a certain test load. During the test, it swings left and right, and after a certain number of times, the wire breakage rate is detectedCheck the total number of swings, automatically count, and automatically stop the operation when the sample is bent until it breaks and cannot be powered on. The wire bending testing machine meets the requirementsUL817According to relevant standards such as the "General Safety Requirements for Flexible Wire Components and Power Cord" and the "General Technical StandardsGB/T14471-93》Wire bending test.

Cable sway and torsion testing machineFeatures:

1Adopting LCD touch human-machine interface, the large interface is intuitive and generous;

2The control part adopts Mitsubishi from JapanPLCReliable performance;

3Adopting Mitsubishi servo motors from Japan for service life and reliability.

4Test count,speed Automatic input adjustment.

5 Multi station testing,high efficiency.Touch screen can monitor each workstation for direct testing.

Main parameters

1Working power supply:AC220V/50HZ；

2Power:500W；

3Conductive function: Yes;

4Test speed:5~60time/Divide;

5Bending angle:0°~360°(+180°～-180°) adjustable;

6Angle accuracy: ≤±1℃

7Test station: independent3Workstation (customizable)

8Load capacity:100 200 300each3group

9Protective board: A protective board is installed on the upper end of the signal interface to prevent the French code from falling and hitting the terminal post

10The position of the guide plate can be adjusted up and down(The distance is1－300mm)

11Metallurgical toolsRCorner:4mmquantity3Individual (customizable)

12Bending frequency:0~99999Can be pre-set;

13Overall dimensions:thick(60cm)Xwide(120cm)Xtall(135cm)

14Weight(about):65kg

specificWire and Cable Swinging and Twisting Testing MachineThe data function can be consulted with the connected testing equipment!