Wind speed/directional pipeline sensor

JT1430typeWind speed/directional pipeline sensor

JT1430Wind speed/directional pipeline sensorThe sensor has been optimized for low wind speed measurement in applications such as laminar flow control or filters in clean rooms and workshops. It uses the principle of hot ball measurement, which represents high precision, high sensitivity, and fast response.
The thermal sensing element manufactured using excellent hot ball technology provides excellent stability and reliability. The compact body size and probe size can be installed in any small space or location without affecting the environment and equipment operation of the measured space. The open standard RS485 Modbus protocol output can be connected to any acquisition signal unit for long-term online monitoring and environmental control.

Features

JT1430wind speed sensorIt is a miniature wind speed sensor with small size, high sensitivity, and can be integrated into circuits. It is suitable for wind speed testing and control in the heat dissipation environment of electrical appliances, circuits, and other chassis to ensure the safe operation and good heat dissipation performance of electrical equipment.
High precision measurement: 0-5m/s: ± (0.1 m/s+2% reading)
＞ 5m/s: ± (0.2 m/s+2% reading)
Tiny probe size: probe length is only 169mm
Wind speed and temperature dual output: simultaneously output wind speed and temperature

technical performance
Performance
High response speed: The wind speed probe has high sensitivity and can sense subtle changes in airflow, making it widely used in the research of airflow organization and laminar flow monitoring in clean spaces.
During measurement, the installation holes should be aligned with the incoming wind direction, and a good measurement angle is an important factor in improving measurement accuracy.

Specifications and Dimensions
Shape size

JT1430wind speed sensorWith a length of less than 17cm, it is very suitable for placement in clean rooms
/Scenarios for laminar flow monitoring such as fume hoods.

Wind speed control of biosafety cabinet

YY0569-2011 (current version) provides four methods: anemometer method, anemometer for measuring exhaust airflow velocity, anemometer for measuring front window airflow velocity with limited front window height, and anemometer for measuring front window airflow velocity.

Application of Wind Speed Measurement in Cleanrooms
Whether it is during the completion acceptance and comprehensive performance evaluation of the clean room, or in the actual operation process, the wind speed and volume should be checked first.
When using JT1430 wind speed sensor to measure laminar flow or FFU air outlet wind speed, the sensor can be fixed at the air outlet or installed inside the pipeline, and the measurement data can be communicated in real-time with the control center to ensure that all equipment operates normally and reaches excellent operating conditions.

Technical Specifications