Wastewater electromagnetic flowmeter

NegotiableUpdate on 04/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Performance characteristics: 1. The instrument structure is simple, reliable, without movable parts, and has a long working life. 2: No flow blocking components, no pressure loss or fluid blockage. 3: No mechanical inertia, fast response, good stability, can be applied to automatic detection, adjustment, and program control systems. 4: The measurement accuracy is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc. 5: Different combinations of PTFE or rubber lining materials and electrode materials such as Hc, Hb, 316L, Ti can adapt to the needs of different media. 6: There are various flow meter models available, including pipeline type and plug-in type. 7: Using EEPROM memory, the storage of measurement and operation data ensures safety and reliability. 8: It has two types: integrated and separated. 9: High definition LCD backlit display. 3、 Technical parameters: 1. Instrument accuracy: Pipeline type 0.5 level, 1.0 level; Insertion type 2.5 level 2: Measurement medium: various liquid and liquid-solid two-phase fluids with conductivity greater than 5 μ S/cm. 3: Flow rate range: 0.2~8m/s 4: Working pressure: 1.6MPa 5: Environmental temperature: -40 ℃~+50 ℃ 6: Medium temperature: PTFE lining ≤ 180 ℃ 7: Rubber

Product Details

Performance characteristics:
1: The instrument structure is simple, reliable, without moving parts, and has a long working life.
2: No flow blocking components, no pressure loss or fluid blockage.
3: No mechanical inertia, fast response, good stability, can be applied to automatic detection, adjustment, and program control systems.
4: The measurement accuracy is not affected by the type of measured medium and its physical parameters such as temperature, viscosity, density, pressure, etc.
5: Different combinations of PTFE or rubber lining materials and electrode materials such as Hc, Hb, 316L, Ti can adapt to the needs of different media.
6: There are various flow meter models available, including pipeline type and plug-in type.
7: Using EEPROM memory, the storage of measurement and operation data ensures safety and reliability.
8: It has two types: integrated and separated.
9: High definition LCD backlit display.
3、 Technical parameters:
1: Instrument accuracy: pipeline type 0.5 level, 1.0 level; Insertion type 2.5 level
2: Measurement medium: various liquid and liquid-solid two-phase fluids with conductivity greater than 5 μ S/cm.
3: Flow velocity range: 0.2-8m/s
4: Work pressure: 1.6MPa
5: Environmental temperature:- 40℃～+50℃
6: Medium temperature: PTFE lining ≤ 180 ℃
7: Rubber material lining ≤ 65 ℃
8: Explosion proof mark: Exmibd Ⅱ BT4
9: Explosion proof certificate number: GYB01349
10: External magnetic interference: ≤ 400A/m
11: Shell protection: integrated type: IP65；
12: Detached type: Sensor IP68 (5 meters underwater, limited to rubber lining)
13: Converter IP65
14: Output signal: 4-20mA DC， Load resistance 0-750 Ω
15: Communication output: RS485 or CAN bus
16: Electrical connection: M20 × 1.5 internal thread, φ 10 cable hole
17: Power supply voltage: 90-220V AC, 24 ± 10% V.DC
18: Maximum power consumption: ≤ 10VA
The flow rate of the measured medium in the wastewater electromagnetic flowmeter should be between 2-4m/s. In special circumstances, the minimum flow rate should not be less than 0.2m/s and the maximum flow rate should not be greater than 8m/s. If the medium contains solid particles, the commonly used flow rate should be less than 3m/s to prevent excessive friction between the lining and the electrode; For viscous fluids, the flow velocity can be chosen to be greater than 2m/s. A higher flow velocity helps to automatically eliminate the effect of viscous substances attached to the electrode, which is beneficial for improving measurement accuracy.