Warm bottle dryer

Product Introduction

The new type of warm bottle dryer is designed for different and irregular bottle shapes such as round bottles, square bottles, and flat bottles. It is easy to adjust and maintain. The warm bottle dryer uses a low-pressure steam distribution drum with seamless steel pipe design. The spray outlet is divided into three adjustable sections, and the height, front and rear, and air output of each section can be adjusted separately to achieve the most perfect warm bottle drying effect. The entire machine casing is made of stainless steel and insulated, which not only saves energy but also meets international safety standards. The bottom stainless steel water tray concentrates condensed water. The whole machine adopts waterproof design, making operation and maintenance convenient.
Specially manufactured:
It can be manufactured into a double-layer insulation furnace with the original configuration, which can better achieve energy-saving and environmental protection effects.

Technical Support

name	Heat shrink film steam shrink furnace
model	SC-200P
Input power (kw)	0.75
Input voltage (v)	3,380V/50HZ
Work pressure (Mpa)	≤0.1Mpa
Steam consumption (kg/h)	10-20
Conveyor speed (m/min)	0-35
Dimensions (mm)	L2000*W400*H1500
Weight (kg)	100

name	Warm bottle dryer
model	SC-200P
input power(kw)	0.75
Input voltage（v)	3,380V/50HZ
Work pressure（Mpa )	≤0.1Mpa
Steam consumption（kg/h)	10－20
Conveyor speed（m/min)	0-35
External dimensions（mm)	L2000*W400*H1500
Weight（kg)	100