-
Phone
（0）13809890260
-
Address
Room 2503, Block C, Huangdu Plaza, No. 3008 Yitian Road, Futian District, Shenzhen
Product Categories
- Acceleration sensor/gyroscope
- Huarui gas detector
- Honeywell's PPT sensor
- Multi functional verification furnace
- Oxygen and CO2 analyzer
- Angular displacement sensor
- Cable displacement sensor
- Constant oxygen analyzer
- electrochemical gas sensor
- Infrared gas sensor
- trace oxygen analyzer
- Temperature and humidity dew point transmitter
- Portable Dew Point Meter
- Online dew point meter
Shenzhen York Technology Co., Ltd
Wall mounted two-wire temperature and humidity transmitter YK102
NegotiableUpdate on 02/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Wall mounted two-wire temperature and humidity transmitter YK102
Product Details
YK series temperature and humidity transmitters are used to meet the needs of accurate temperature and humidity measurement in HVAC applications. Tobacco storage, cigarette production, food preservation, porcelain drying, cultural relic preservation, agricultural greenhouses and other fields have wide applications.
Performance indicators:
Performance indicators:
|
measurement range
|
Temperature -10-90 ℃ (or according to customer requirements)
|
|
Humidity 10-98% RH
|
|
|
measurement accuracy
|
temperature+0.5℃
|
|
humidity+3%RH
|
|
|
power supply
|
18-36VDC
|
|
output signal
|
Temperature 4-20mA (corresponding to -10-90 ℃)
|
|
Humidity 4-20mA (corresponding to 0-100% RH)
|
|
|
load resistor
|
RL<500Ω
|
|
Equipped with display transmitter
|
Temperature range 0-80 ℃
|
|
display resolution
|
Temperature 0.1 ℃
|
|
Humidity 1% RH
|
|
|
character height
|
12.7mm
|
Dimensions (mm):
Maintenance: The probe should not be used in an environment with organic solvent vapors such as acetone. The dust cover can prevent airborne dust and fiber contamination of the humidity sensor in the gas. If the micro holes of the dust cover are found to be blocked, the cover can be removed, cleaned, and dried for use. Temperature fluctuations should be prevented during use to prevent probe condensation, which can affect measurement accuracy and corresponding time.
