WIKA shock resistant pressure gauge filled with silicone oil stainless steel material

The housing of the WIKA 213.53.063 high-precision pressure gauge is made of stainless steel, and the liquid receiving part is made of copper alloy. The Vicat pressure gauge (mechanical pressure measuring instrument) can meet the requirements of gauge pressure, absolute pressure, and differential pressure measurement applications, and has been tested millions of times in practice. WIKA pressure gauges offer measurement systems using Bourdon tube, diaphragm, or capsule technology, providing solutions tailored to different customer applications. The pressure gauge has a range from 0... 0.05 kPa to 0... 600 MPa, with a display accuracy of up to 0.1%. In addition, WIKA also provides pressure components made of copper alloys, stainless steel, and special materials to meet various requirements of industrial and process instruments. WIKA pressure gauge models are generally 232.36/232.30/232.50/233.36, etc. However, WIKA models are generally not displayed on the case. The WIKA pressure gauge complies with the EN-837-1 standard, which refers to the European standard (EN 837-1-1997).

Description of Wika shock resistant pressure gauge

The pressure shell of the 213.53 liquid filled Bourdon tube is made of stainless steel, and the liquid receiving part is made of copper alloy.

The 213.53 filling pressure gauge meets the requirements of the industry standard EN 837-1 for Bourdon tube pressure gauges.

Due to the liquid filling inside the table, the pressure element and motion are effectively buffered. Therefore, these instruments are particularly suitable for measuring high dynamic load points, such as frequent pressure fluctuations or vibrations.

The standard sizes of the 213.53 liquid filled pressure gauge case are 50, 63, and 100 millimeters, and comply with the IP65 protection level. The accuracy of this pressure gauge can reach level 1.0 and can be widely used in industry.

When installed on the control panel, the pressure gauge with axial installation connection can be equipped with an installation edge or triangular convex edge and installation bracket.

WIKA shock resistant pressure gauge filled with silicone oil stainless steel material213.53.063 Pressure gauge EN837-1

Application of Wika shock resistant pressure gauge

Suitable for harsh working conditions with pulses or vibrations;

Suitable for all gas and liquid media that will not block pressure systems or corrode copper alloy components;

Hydraulic device;

Compressor and shipbuilding;

Functional characteristics of WIKA shock resistant pressure gauge

Anti vibration, anti impact;

The shell is sturdy;

Type certification in the shipbuilding industry;

Range: 0 .. 100 MPa；

WIKA shock resistant pressure gauge filled with silicone oil stainless steel material213.53.063 Pressure gauge EN837-1