Vortex dry pump

Vortex oil-free vacuum pumpOil free Iwata Vacuum Pump (IWATA) ISP-500C Made in Japan

This vacuum pump is a clean exhaust specification.
Please do not allow toxic gases, explosive and flammable gases, corrosive gases, drugs, solvents, powders and other substances that are harmful to the human body to flow through the vacuum pump. For vacuum pumps that have discharged special gases, our company does not perform maintenance and upkeep. Please understand.
Please use within the temperature range of 5 ℃ to 40 ℃ (ISP-1000 is 10 ℃ to 40 ℃).

Anest Iwata ISP-500C Dry Vortex Single Phase VFD Pump Overview:

The Anest Iwata ISP-500 oil-free vortex pump provides a clean vacuum environment, eliminating the hassle of tedious lubricant maintenance or seal water management.

The Anest Iwata ISP-500C dry pump is not restricted by installation due to the use of an air-cooled system and does not require water cooling.

The ISP-500 dry vortex vacuum pump is equipped with an air flushing port, which can extract residual moisture after extracting humid gases. This port also helps maintain maximum pressure.

The ISP series vacuum pump maintains low power consumption from atmospheric pressure to maximum pressure.

This pump system is only suitable for cleaning processes. Do not use explosive, flammable, toxic or corrosive substances or substances containing chemicals, solvents or particles.

The ISP-500C vacuum pump should be used in an ambient operating temperature range of 5 º C to 40 º C.

Anest Iwata ISP 500C 抽速：

anest iwata 500c 抽速

Anest Iwata ISP 500C oil-free vortex pump application:

Sputtering equipment, vacuum demolding equipment, ion plating equipment

Accelerator, synchrotron radiation

Surface modification, electron beam process

Gas recovery device

vacuum equipment

leak detector

Equipment processing system

Vacuum furnace, heat treatment furnace

Laboratory use

vacuum packaging machine

Anest Iwata ISP 500C Size:

Anest Iwata 500c ISP 500c

Click here to view the Anest Iwata ISP-500 C Dry Vortex Vacuum Pump User Manual.

Japanese Aneste Iwata oil-free vortex vacuum pump

Brand: ANEST-IWATA

Model:ISP-500C

Material: Cast aluminum

Usage: Vacuum coating, packaging equipment, testing equipment, etc

Number of impellers: Vortex pump

Speed: 3500 (rpm)

Shaft power: 0.4 (KW)

Drive mode: electric

Pump shaft position: horizontal

Extreme vacuum: ≤ 1 (7.5 × 10-3) Pa {Torri}

Flow rate: 500L/min

Leakage rate: ≤ 1 × 10-5 [Pa.m3/s]

Motor power: 0.4KW/h

Voltage used: AC100V/115V/230V (for single-phase motor pump body with thermal protection device), with optional three-phase motor voltage

Product weight: Single phase (44Kg), Three phase (38Kg)

Noise: 60dBa (68dBa with blowing function, which is exhaust noise)

Blowing air volume: 10L/min

Water vapor volume: 25g/day (when blowing air is required, a small amount of water vapor will be emitted into the atmosphere)

Inlet size: 40mm

Air outlet size: 25mm

Cooling method: air cooling

Working environment temperature: 5-50 ℃

This product is suitable for vacuum packaging equipment, vacuum coating, robot vacuum gas source, testing instruments, recycling devices, large-scale printing equipment adsorption, and more. A small, high flow, and high vacuum vacuum gas source can be achieved without the need for auxiliary structures (devices) such as oil and cooling water.

• Iwata oil-free vortex vacuum pump Other models:

• ISP-50

• ISP-90

• ISP-250C

• ISP-500C

• ISP-1000