Vibration level meter

NegotiableUpdate on 06/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The vibration level gauge is used for measuring granular materials with a density starting from 20 g/l - the compact version has an application range that can reliably detect the limit directly at the installation position, with an accuracy of up to millimeters. The surface of the vibrating rod is smooth, without edges or sharp corners, which can prevent solid material from blocking or getting stuck, making it easy to clean. Used for extreme measurement of granular and coarse-grained materials. Report the minimum and maximum material level limits accurately and reliably. The smooth surface of the vibrating rod prevents the accumulation or jamming of particles, making it easy to clean. Maintenance is cheap and can be adjusted without materials, which is simple and greatly reduces time and cost. The functions are reliable and safe, and the switch points are not affected by the product

Product Details

main features
Strong adaptability - Compared with tuning fork level switches, single rod probes can effectively prevent material clamping and sticking, and can still work stably even when there are many hanging materials. Capacitive level switch

Compared to being unaffected by the electrical parameters of the tested medium, changes in material variety and humidity do not affect the operation of the sensor.
No need for calibration - after installation, it can be put into stable operation without adjustment.
High sensitivity - capable of measuring materials with extremely low specific gravity.

TECHNICAL INDEX
Power supply voltage: AC 220V 50Hz/DC 24V
Power consumption: 1.5W
◇ Working environment: Instrument section: -30~70 ℃
Probe section: -30~100 ℃ (high temperature type -30~150 ℃)
◇ Work pressure: less than 2MPa
◇ Vibration time: 1-5 seconds
◇ Response time: approximately 1 second
Output mode: A set of relay outputs (AC 220V/3A, DC30V/3A)
Sensitivity: High, medium, and low levels can be set
◇ Installation connector: R1.5/G1.5/flange (customizable according to requirements, minimum thread of 1.5 inches)
Electrical interface: M20 × 1.5
◇ Insertion depth: ≥ 260mm