-
E-mail
shjjsb@163.com
-
Phone
15821960580
-
Address
Room 312, Office Building 8, Jiangqiao Wanda Plaza, Jiading District, Shanghai
Product Categories
Jingjia Electromechanical Equipment (Shanghai) Co., Ltd
Vertical machining center VDL850A
NegotiableUpdate on 04/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Vertical machining center VDL850A
Product Details
Vertical machining center VDL850A
1. Main features
nFanuc 0i-MF(5) systemUSBPorts and10.4inchColor LCD display
nHigh strength cast iron bed body
nMain shaft toothed belt drive
nRigid tapping
n20Take the bamboo hat style knife magazine (optional)24Put the robotic arm knife magazine
nRolling guide rail（X -34mm, Y -45mm, Z -45mm)
nDirect connection between servo motor and super large, double pre tension screw(X -φ40 mm, Y -φ40 mm, Z -φ40 mm)
nFast moving speed（X -24m/min, Y -24m/min, Z -20m/min)
2. Main standard configuration
lFANUC 0i MF(5)system
l20Put the bamboo hat style knife magazine
lSpiral chip conveyor and chip storage vehicle
lIntegrated protective cover
lAutomatic lubrication system
lwork tool box
lwork make, do, create, compose, write, etc. lamp
lpolice show lamp
lElectrical box heat exchanger
lSpindle air curtain dust prevention system
lSpindle taper hole blowing device
lRigid tapping
lWorkpiece cooling system
lRS-232TheUSBInterface andDNCfunction
lDoor opening protection device (protective door)
lHandheld chip blowing air gun
lSimple oil-water separator
lAnchor bolts and pads
lRandom technical data
3.Technical Specification
Processing range
Workbench specifications (length x width) |
mm |
1000×500 |
Workbench T-shaped slot（Number of slots x slot width x slot spacing） |
mm |
5×18×100 |
Maximum load capacity of workbench |
kg |
500 |
Scope of workpieces(Length x Width)X high） |
mm |
1000×500×500 |
X/Y/ZCoordinate travel |
mm |
860/510/560 |
Distance from the centerline of the spindle to the front of the column |
mm |
575 |
Distance from the spindle end face to the flat surface of the worktable |
mm |
145～705 |
spindle
spindlemaximum speed |
r/min |
8000 |
spindle taper hole |
No.40 (7:24 ) |
The maximum speed of the spindle is sometimes limited by factors such as the tool and fixture used. If you need to continuously use the maximum speed, please consult and negotiate with the responsible department of our company.
Mechanical characteristic curve of electric motor
