Vacuum laminating machine TM2580H

Note: Huaweiying Woodworking Machinery continuously researches and improves product specifications and design details. Any changes to the above specifications will not be notified separately. Equipment features: 1. The equipment rack is made of 6 pieces of 25mm steel plates processed without welding deformation. 2. The worktable entry and exit walking system is controlled by a frequency converter, using a low-speed start, gradual acceleration, high-speed walking, and low-speed stop mode. 3. The operating system adopts Taiwan's Delta PLC programmable controller, touch screen human-machine interface, convenient control, advanced technology, and high degree of automation. 4. Adopting German technology, domestically produced and assembled direct connected 100L vacuum pump (not imported from Germany, with a pumping capacity of 100 cubic meters per hour). 5. The electrical system contactor uses Schneider 0910 and 2510 from France. The intermediate relay uses Weidmuller intermediate relay, Taiwan Delta PLC, and Taiwan Delta touch screen. Other electrical components are made in China, with Chint being the main choice. 6. The hydraulic system host adopts the Taiwan system, and the motor and oil pump use Taiwan Kangbaisi. The hydraulic system principle is plate insertion, with an internationally advanced structure, low failure rate, high flow rate, and rapid pressurization (pressurization time is about 5 seconds, while the traditional stacking valve pressurization time is about 15-20 seconds). Effectively improve production efficiency. 7. The equipment includes one set of partitions, which can achieve the simultaneous production of two different colors of the same type of PVC film. 8. All standard cabinet door panel trimming knives (stamp style) and hook knives.