Vacuum centrifugal concentrator

Vacuum centrifugal concentrator

Product Principle:

When the pressure decreases,The boiling point of the solvent also decreases. When the pressure drops to a certain level,Under relatively low temperature conditions,The solvent can boil and evaporate. To avoid sample evaporation and cross contamination,Adopting high-speed centrifugal rotation technology,Ensure that the sample is in the sample tube and will not spray out.

The vacuum pump keeps the entire system in a high vacuum state inside,Reduce the boiling point of solvents,Accelerate the concentration rate. The solvent vapor is extracted by a vacuum pump and centrifuged,The pumping speed of the vacuum pump will limit the concentration speed,At this point, a cold trap that can effectively condense solvent vapor is needed,The cold trap can quickly condense the solvent vapor before reaching the vacuum pump,Maintain the vacuum level of the entire system,Thereby accelerating the concentration rate,And it can protect the vacuum pump from solvent vapor corrosion.

Vacuum centrifugal concentrator

Performance characteristics:

1.High throughput: capable of processing tens to hundreds of samples simultaneously,No cross contamination phenomenon.

2.Low temperature concentration: Avoid sample loss, denaturation, decreased activity, and oxidation.

3.Humanized Design: One Health Operation,safe and convenient,Avoid misoperation.

4. Vacuum delay function: Built in vacuum certification delay function, which can vacuum after the speed reaches the preset value, effectively protecting the sample,anti-splash.

5. Less loss: the sample does not produce foam,Less loss and higher yield.

6. Rotor Design: Quick Insertion Rotor Design,Can quickly switch between different rotors,The rotor is integrally formed without welding points.

7. Centrifugal imaging function: capable of observing sample concentration without stopping the machine.

8. High safety: The compact device with automatic center positioning ensures safety during operation,Full protection throughout the process.

Vacuum centrifugal concentrator

Technical parameters:

Vacuum centrifugal concentrator-C

Frozen version

characteristic：Support low-temperature concentration,Samples are safer

maximum speed：0-2000r/min

maximum centrifugal force：590Xg

Compatible rotor capacity:184*1.5ml/2ml; 132*1.5/2ml; 72*5ml; 24*15ml; 12*50ml; 8*100ml; 4*250ml,2*96orifice plate

display mode：7Inch touchscreen display

Ultimate vacuum value：<10pa

Timed Standard Country：0-99h59min

Centrifugal imaging function：optional,It can observe the concentration of samples without stopping the machine.

Temperature control range：room temperature~100°C,0.1°Cincreasing

power supply：AC220V 50Hz/60Hz 10A

noise value：≤50dB(A)

Overall dimensions(L*D*H)：520*350*240