VIP/STP high vacuum insulation board packaging machine

VIP vacuum insulation board (referred to as VIP board) is currently an effective protectionWarm materials. In his life

During the production and application process, ODS substances are not used, which fully complies withEnvironmental requirements, and

The product has a very low thermal conductivity, which is higher than that of rigid polyurethane foamMo is one order of magnitude lower

It has the dual advantages of environmental protection and energy conservation. Vacuum insulation boardUsing the principle of vacuum insulation

, consisting of core insulation material, gas adsorption material, and enclosed insulationGas film composition, filled

The core filling material is tightly combined with the vacuum protection surface, which can effectively avoidCaused by air convection

Heat transfer, significant decrease in thermal conductivityOnly 0.004 w/m.k,

Thus achieving insulation effect. Vacuum insulation board is widely usedUsed for refrigerators, freezers, refrigerated trucks

Insulation equipment such as cold storage and electric water heaters.

The core material of VIP insulation panels commonly used for building insulation is composed of microporous inorganic and fibrous materials

Composition of dimensional materials Inorganic materials with micropores (so-called raw materials: such as silica

Made by crushing, mixing and stirring meteorological silicon, glass wool and ultra-fine short cut fiber materials again

From the mixing bucket to the automatic feeding and forming of the pressure forming machinery: (The raw materials are from the powder bucket)

Enter the fabric device, push it into the mold by the powder truck and scrape it flat, press it into shape, and top the lower mold

The blank body is pushed out of the machine by the powder truck, completing a working cycle and immediately entering the self

Dynamic continuous cycle compression, the compression action can be adjusted according to the product forming situation,

The cycle speed can also be adjusted).Pressed and formedvipCore material is pushed out of the machine by the powder car

The conveyor belt runs smoothly into the drying line(Optional before delivery to the drying line

After this non-woven fabric is wrapped, it will enter the drying process).After drying, it can be packed into an aluminum foil bag,Enter vacuum

Machine vacuum extraction