- Phone
-
Address
Room 101-2, Building F02, Software Park Phase III, Jimei District, Xiamen City
Xiamen Loken Instrument Co., Ltd
Room 101-2, Building F02, Software Park Phase III, Jimei District, Xiamen City
Detailed information on VB Germany MV 10C EX VARIO+AK+EK chemical diaphragm pump
| brand | Vacuubrand/Germany | price range | 50000 to 100000 |
|---|---|---|---|
| Instrument type | diaphragm pump | Product Type | No oil pump |
| Origin category | Import |
VB Germany MV 10C EX VARIO+AK+EK Chemical Diaphragm Pump
VB Germany MV 10C EX VARIO+AK+EK Chemical Diaphragm Pump
VB Germany MV 10C EX VARIO+AK+EK Chemical Diaphragm Pump
| technical indicators | unit | MV 10C EX VARIO +AK+EC |
|---|---|---|
| Vacuum controller | No controller | |
| Number of pump heads/stages | 8 / 4 | |
| Zui high pumping speed | m3/h | 8.1 |
| Zui high pumping speed | cfm | 4.8 |
| Extreme vacuum (absolute pressure) | mbar/torr | 2 / 1.5 |
| Extreme vacuum (absolute pressure), using gas ballast | mbar/torr | 10 / 7.5 |
| Overall leakage rate | mbar l/s | 0.1 |
| Environmental temperature range (operation) | °C | 10 - 40 |
| Environmental temperature range (storage) | °C | -10 - 60 |
| Maximum medium temperature | °C | 40 |
| Maximum outlet pressure (absolute pressure) | bar | 1.1 |
| Air inlet interface | KF DN 25 small flange | |
| Air outlet interface | Hose nozzle joint DN 8-10 mm | |
| Coolant interface | 2 DN 6-8 mm hose nozzle fittings | |
| Rated motor power | kW | 0.5 |
| Maximum working current | A | 6.4 |
| Maximum starting current | A | 2 x 150A / 2.5ms |
| Motor speed range | min-1 | 30 - 1500 |
| Protection level | IP 54 | |
| Size (length x width x height), approximately | mm | 651 x 555 x 452 |
| Weight, approximately | kg | 63 |
| Noise level at 50 Hz, typical value | dBA | 42 |
| ATEX specifications | Extraction chamber (extracted gas): II 2G IIC T3 X Environment for purging with inert gas: II 2G IIB T4 X Environment without inert gas blowing: II 3G IIB T4 X Motor: II 2G Ex d IIB T4 Gb |
|
| Product configuration | After the installation of the pump body is completed, it can be connected and used. It comes with an instruction manual. Each motor comes with two wires (two motors), and the user needs to provide external protection to prevent glass damage or breakage. Speed control is achieved through a 4-20 mA current loop (4 mA=0 rpm, 20 mA=1500 rpm). The control signal line is 10 meters long, and the unplugged main cable is 2 meters long. MV 10C VARIO EX has two motors (each motor is equipped with control wires and main wires) | |
| Optional accessories | PTFE管 KF DN 25 (1000 mm: 686033) I/O Analog Unit VACUU · BUS 4-20mA/0-10V (635425) Signal adjuster 0-10V/4-20mA (635426) Power/input isolation amplifier 4-20mA (635427) Vacuum sensor ATEX+-1mbar 4-20mA (635423) Vacuum sensor ATEX+-3mbar 4-20mA (634424) Vacuum controller CVC 3000 (636559+612090) VACUU·BUS ® Plug with 2m wire (612462) |
VB Germany MV 10C EX VARIO+AK+EK Chemical Diaphragm Pump
By using the new ATEX VARIO chemical diaphragm pump and chemical vacuum system, the vacuum degree can be controlled by the motor speed. The VARIO vacuum pump can be driven through an additional control signal line. The optional CVC 3000 controller and system accessories (I/O modules, supply/isolation amplifiers) and ATEX sensors can perform fully automatic distillation processes without the need for parameter settings or programming. Under adaptive control, the system can independently find boiling point pressure, continuously adjust vacuum degree, and optimize based on steam pressure. The vacuum controller and system accessories are installed in non explosive areas.
Performance characteristics
Equipped with all the advantages of ATEX explosion-proof chemical diaphragm pump, including an inlet collection bottle AK and an outlet condenser EK
No lag VARIO vacuum control for shorter process time
VARIO vacuum pump adjusts speed only according to demand - minimal energy consumption, longer maintenance cycle, and quiet operation
CVC 3000 vacuum controller (optional), capable of vacuum control and fully automatic process
Can provide a complete set of system accessories I/O modules, supply/isolation amplifiers, and ATEX vacuum sensors

