Used epoxy resin steel strip granulator for old goods processing and recycling

Used epoxy resin steel strip granulator for old goods processing and recyclingBy utilizing the low melting point characteristics of the material and according to the viscosity range of the material in its molten state, a special fabric device is used to evenly distribute the molten liquid on the steel strip moving uniformly below it. Under the cooling effect of the continuous spray device installed below the steel strip, the material is cooled and solidified during the movement and transportation process, thereby achieving the purpose of granulation and forming. After cooling and granulation, it can be directly packaged.

Fabric feeder: Driven by a speed regulating motor, the melted material supplied by the feeding system is reheated, and then the material is divided into droplets, strips, or flakes, which are dispersed onto a stainless steel belt dragged by the speed regulating motor. Steel strip system: including stainless steel strip and pulley. The steel strip moves uniformly under the drag of the speed regulating motor and is the carrier for material cooling and forming. Spray cooling system: mainly composed of nozzles, water tanks, etc. The nozzles evenly spray cooling water on the back of the steel strip, causing the material on the steel strip to quickly cool and solidify. Transmission system: provides power for the operation of equipment and ensures the coordinated work of various components. Other: including insulation devices, frames, scrapers, and other components.

Suitable for cooling and granulation of molten materials with a melting point range of 50-300 ℃, widely used in industries such as petrochemicals and fine chemicals. Specifically suitable for granulation of materials with low melting points that solidify after cooling, such as phenolic resins

Sulfur, paraffin wax, asphalt, rosin and rosin resin, carved white blocks, maleic anhydride, p-nitrochlorobenzene, anti-aging agents (RD, 4010Na, 4020, etc.), MOCA, EVA hot melt, stearate, fatty acids, partial anhydrides

Aluminum sulfate, calcium chloride, polyamide resin, m-phenylenediamine, catechol, sodium hydrosulfide, epoxy resin, rubber additives, refined p-dichlorobenzene and other materials. Technical requirements for material handling: The material must be filtered to prevent solid impurities from entering the granulation head, otherwise it may cause wear or blockage of the head, affecting the quality of granulation. Temperature control: The temperature control should be determined based on the melting point temperature, and the insulation requirement is that the temperature change should not exceed ± 3 ℃. Cooling system: The cooling system should be equipped with a filter screen, and the temperature of the cooling water is generally between 5 ℃ and 25 ℃. The water temperature is low, the molding is fast, the granules are good, and the output is high.

Used epoxy resin steel strip granulator for old goods processing and recycling