-
E-mail
sales@vecona-electric.com
- Phone
-
Address
Room 210, Building 10, Yangshan Zhigu Science and Technology Innovation Park, Xingxian Road, High tech Zone, Suzhou City, Jiangsu Province
Product Categories
Suzhou Weikna Electric Co., Ltd
USTE General Control, Protection, and Isolation Transformer
NegotiableUpdate on 03/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
USTE General Control, Protection, and Isolation Transformer
Product Details
USTE
General control, protection, and isolation transformer
Universal input voltage, PRI 208-600 Vac, SEC 2 x 12-2 x 115 Vac, 100-3.200 VA
General data
Measure output voltage 2 x 12-2 x 115 Vac
Measure input voltage 208-600 Vac
Measurement power 100-3.200 VA
Insulation material grade B
The maximum ambient temperature is 40 ° C
Efficiency up to 96%
Protection level IP 00
advantage
Universal input voltage 208 to 600 Vac
Reduce impulse current
DIN rail clamp is used below 250VA
Convenient fixation using sturdy metal support angle iron with long holes
Touch protection for wiring terminals, compliant with UVV BGV A3 requirements
Use elastic terminals for quick installation
Good corrosion resistance and minimal noise ensured through vacuum infiltration
Compact mechanism achieves high power for each flow rate
standard
Control transformers comply with VDE 0570 Part 2-2, DIN EN 61558-2-2, EN 61558-2-2, IEC 61558-2-2, UL 5085-1/-2, CSA 22.2 No.66
The protection transformer complies with VDE 0570 Part 2-6, DIN EN 61558-2-6, EN 61558-2-6, IEC 61558-2-6, UL 5085-1/-2, CSA 22.2 No.66
Isolation transformers comply with VDE 0570 Part 2-4, DIN EN 61558-2-4, EN 61558-2-4, IEC 61558-2-4, UL 5085-1/-2, CSA 22.2 No.66
license
UL 5085-1/-2, CSA 22.2 No.66
application
As a protective transformer used for safe electrical isolation of input and output terminals. By limiting the output voltage, this transformer is suitable for circuit construction of SELV and PELV.
As a control transformer used for electrical isolation of input and output terminals. By design, the transformer is suitable for power supply to control devices that comply with VDE 0113 requirements.
As an isolation transformer used for safe electrical isolation of input and output terminals. This transformer is suitable for the construction of protective isolation devices and protective measures that comply with VDE 0100 requirements.
Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/
600 Vac
General control, protection, and isolation transformer
Universal input voltage, PRI 208-600 Vac, SEC 2 x 12-2 x 115 Vac, 100-3.200 VA
General data
Measure output voltage 2 x 12-2 x 115 Vac
Measure input voltage 208-600 Vac
Measurement power 100-3.200 VA
Insulation material grade B
The maximum ambient temperature is 40 ° C
Efficiency up to 96%
Protection level IP 00
advantage
Universal input voltage 208 to 600 Vac
Reduce impulse current
DIN rail clamp is used below 250VA
Convenient fixation using sturdy metal support angle iron with long holes
Touch protection for wiring terminals, compliant with UVV BGV A3 requirements
Use elastic terminals for quick installation
Good corrosion resistance and minimal noise ensured through vacuum infiltration
Compact mechanism achieves high power for each flow rate
standard
Control transformers comply with VDE 0570 Part 2-2, DIN EN 61558-2-2, EN 61558-2-2, IEC 61558-2-2, UL 5085-1/-2, CSA 22.2 No.66
The protection transformer complies with VDE 0570 Part 2-6, DIN EN 61558-2-6, EN 61558-2-6, IEC 61558-2-6, UL 5085-1/-2, CSA 22.2 No.66
Isolation transformers comply with VDE 0570 Part 2-4, DIN EN 61558-2-4, EN 61558-2-4, IEC 61558-2-4, UL 5085-1/-2, CSA 22.2 No.66
license
UL 5085-1/-2, CSA 22.2 No.66
application
As a protective transformer used for safe electrical isolation of input and output terminals. By limiting the output voltage, this transformer is suitable for circuit construction of SELV and PELV.
As a control transformer used for electrical isolation of input and output terminals. By design, the transformer is suitable for power supply to control devices that comply with VDE 0113 requirements.
As an isolation transformer used for safe electrical isolation of input and output terminals. This transformer is suitable for the construction of protective isolation devices and protective measures that comply with VDE 0100 requirements.
| variant | Measure input voltage | Measure output voltage | measured power |
| VDE (DB cos phi=1) | USTE | 40/2x12 | 208 Vac/ 230 Vac/ 380 Vac/ 400 |
| Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ | 600 Vac | 2 x 12 Vac | 40 VA |
| USTE | 100/2x12 | 208 Vac/ 230 Vac/ 380 Vac/ 400 | Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ |
| 600 Vac | 2 x 12 Vac | 100 VA | USTE |
| 100/2x115 | 208 Vac/ 230 Vac/ 380 Vac/ 400 | Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ | 600 Vac |
| 2 x 115 Vac | 100 VA | USTE | 250/2x12 |
| 208 Vac/ 230 Vac/ 380 Vac/ 400 | Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ | 600 Vac | 2 x 12 Vac |
| 250 VA | USTE | 250/2x115 | 208 Vac/ 230 Vac/ 380 Vac/ 400 |
| Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ | 600 Vac | 2 x 115 Vac | 250 VA |
| USTE | 400/2x12 | 208 Vac/ 230 Vac/ 380 Vac/ 400 | Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ |
| 600 Vac | 2 x 12 Vac | 400 VA | USTE |
| 400/2x115 | 208 Vac/ 230 Vac/ 380 Vac/ 400 | Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ | 600 Vac |
| 2 x 115 Vac | 400 VA | USTE | 630/2x12 |
| 208 Vac/ 230 Vac/ 380 Vac/ 400 | Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/ | 600 Vac | 2 x 12 Vac |
| 630 VA | USTE | 630/2x115 | 208 Vac/ 230 Vac/ 380 Vac/ 400 |
Vac/ 415 Vac/ 440 Vac/ 460 Vac/ 480 Vac/ 500 Vac/ 525 Vac/ 550 Vac/ 575 Vac/
600 Vac
