-
E-mail
122092220@qq.com
-
Phone
15800931558
-
Address
Room 202, Building 3, No. 38 Jianyun Road, Zhoupu Town, Pudong New Area, Shanghai
Product Categories
- conductivity electrode
- Industrial online sludge interface instrument
- Colorimetric series (silicon/phosphorus/sodium/iron/copper/ammonia/hydrazine)
- Acid alkali salt concentration
- Hardness controller
- Online acid-base salt concentration meter
- Conductivity flow cell
- Dissolved oxygen electrode flow cell
- PH electrode/ORP electrode
- Industrial conductivity meter
- Industrial online pH electrode
- Industrial hardness analyzer
Shanghai Sanben Environmental Protection Technology Co., Ltd
Two wire industrial conductivity meter
NegotiableUpdate on 12/25
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The product is widely used for online monitoring of conductivity values in power, chemical, metallurgical, water treatment, pharmaceutical, electroplating, printing and dyeing, food, and tap water industries.
Product Details
Typical applications:
The EC3000 two-wire industrial conductivity meter is widely used for online monitoring of conductivity values in power, chemical, metallurgical, water treatment, pharmaceutical, electroplating, printing and dyeing, food, and tap water industries.
Instrument features:
1. Integrated LED display with two-wire system
2. Adopting a single-chip microcomputer with low power consumption, high performance, high stability, and high reliability
3. High measurement accuracy, fast response speed, small size, easy installation and maintenance
4. Intrinsic safety explosion-proof, explosion-proof grade
5、Ex ia IIB T6 Ga
6. Four speed range automatic switching, automatic temperature compensation
7. 4-20mA isolated current output
Technical Indicators:
Measurement range: Conductivity 0~200000us/cm
Temperature range 0-100 ℃
The measured water temperature is 0-130 ℃
Power supply 24VDC
Basic error of conductivity measurement ± 1% F.S
Basic temperature measurement error ± 0.5 ℃
Temperature compensation range 0-60 ℃
Isolation current output 4-20mA (RL ≤ 500 Ω)
The transmitter adopts an explosion-proof cast aluminum sealed housing, with a protection level of up to IP66, LED display, and two-wire isolated current output. It is particularly suitable for industrial sites with harsh environments, the presence of explosive gases, and explosion-proof requirements.
| EC3000 two-wire industrial conductivity transmitterSelection Table | ||||||||||||
| Y | Integrated type (measurement, 4-20mA output integrated) | structural style | ||||||||||
| F | Split type (high impedance sensor, mV electrode signal output, matched controller on-site display) | |||||||||||
| G | Domestic conductivity electrode sensor | Electrode | ||||||||||
| U | Imported conductive electrode sensors from abroad | |||||||||||
| C | Insertion type M48 × 2 thread, insertion depth of 100, 150, 200mm (user reference) | Installation method | ||||||||||
| F | Submerged (installation height 0.6m-4m), flange or threaded installation, specify when ordering | |||||||||||
| S | Horizontal flow type (with matching horizontal flow pool) DN25, PN0.6 flange GB9119.2-88 | |||||||||||
| T | User specific requirements | |||||||||||
| P | Ordinary industrial processes use 0-80 ℃ | Application scenarios | ||||||||||
| J | Use 0-100 ℃ in high temperature and strong alkali environments | |||||||||||
| S | High temperature strong acid field suitable for 0-110 ℃ | |||||||||||
| W | 0-80 ℃ is used in sewage treatment facilities | |||||||||||
| D | Use 0-100 ℃ in low conductivity situations | |||||||||||
| X | Disinfect and ferment at 0-135 ℃ | |||||||||||
| Y | High temperature and high pressure, organic matter 0-140 ℃ (1MPa) | |||||||||||
| R | Specialized electrodes for printing and dyeing | |||||||||||
| C | Ultra low temperature type -25-25 ℃ | |||||||||||
| 00 | atmospheric pressure | pressure | ||||||||||
| 06 | ≤0.6MPa | |||||||||||
| 10 | ≤1.0MPa | |||||||||||
| W | No on-site instructions (integrated) | On site display method | ||||||||||
| M | On site pointer type mA meter display (integrated type) | |||||||||||
| E | On site LED display | |||||||||||
| C | On site LCD display | |||||||||||
| A | ABS | wetted material | ||||||||||
| P | UPVC or PPR (specify when ordering) | |||||||||||
| B | 1Cr18Ni9Ti | |||||||||||
| F | Stainless steel polytetrafluoroethylene composite material | |||||||||||
| Q | Other materials | |||||||||||
| O | non-explosion-proof | explosion-proof | ||||||||||
| I | Intrinsic safety explosion-proof (4-20mA)Explosion proof grade Exia IIB T4 | |||||||||||
| Installation length (sunken, plug-in) L=? | ||||||||||||
| Measurement range conductivity | ||||||||||||
| EC3000 | Y | U | F | P | 00 | E | B | O | L=500mm | 0-200us/cm | Example of Selection | |
Similar Product Recommend
