Two line fixed hydrogen gas detector

Two line fixed hydrogen gas detectorThe carbon monoxide gas concentration detection transmitter adopts a cast aluminum explosion-proof shell as the protective shell, and has the characteristics of small size, light weight, and easy installation. The electrochemical hydrogen gas sensor is used as the hydrogen gas concentration detection element to convert the hydrogen gas concentration content into an electrical signal. The weak electrical signal is amplified by the amplifier and sent to the microprocessor for signal processing by the transmission board, and then converted into a standard (4~20) mA current signal, which is transmitted to the required upper computer equipment. The connection between the transmitter and the upper equipment only requires a two core cable, and the connection does not distinguish between positive and negative polarity. It superimposes the signal with the power supply, which can both supply power to the equipment and transmit signals, greatly solving the difficulty of on-site construction wiring and making equipment debugging, installation, and maintenance faster and more convenient. In addition, this transmitter has precise measurement, rapid response, long service life, stable and reliable performance, and is very suitable for monitoring hydrogen gas concentration in places such as petrochemicals, metallurgy, and environmental monitoring.

Two line fixed hydrogen gas detector

Product Features:

1> Adopting cast aluminum explosion-proof shell

2> Compact in size, lightweight, and easy to install.

3> Built in 4-series electrochemical sensor.

4> Equipped with one click zero adjustment and one click calibration functions.

5> Output standard (4-20) mA current signal.

6> Two electrodes are connected without polarity, and the connection does not distinguish between positive and negative poles.

7> The maximum transmission distance of the standard (4-20) mA current signal is up to 1000 meters.

8> Can be equipped with various devices such as PLC, DCS system, GDS system, gas alarm controller, etc.

9> Accurate measurement, rapid response, long lifespan, stable and reliable.

10> Strong anti electromagnetic interference performance, more suitable for complex industrial environments.

Technical parameters

1> Gas detection: hydrogen gas

2> Detection method: natural diffusion type

3> Measurement range: 0-1000PPM

4> Response time: ≤ 60 seconds (T90)

5> Indication error: ± 3% FS

6> Sensor type: Electrochemical

7> Execution standard: JJG365-2008

8> Working mode: Fixed long-term working mode

9> Working voltage: 24V DC

10> Working current:<25mA

11> Output signal: (4~20) mA standard current signal

12> Material structure: Die cast aluminum explosion-proof shell

13> Dimensions: (165 * 135 * 75) mm

14> Connecting cable: Two core shielded cable, recommended cross-sectional area (2 * 0.75) mm

15> Connection distance: ≤ 1000m

16> Protection level: IP65

17> Installation method: Wall mounted

18> Explosion proof form: Explosion proof type

19> Inlet: Hexagonal compression nut

20> Interface specification: 20X1.5mm