TrueDry CV9 Fully Automatic Multi Sample Moisture Content Analyzer

In 1983, Decagon Corporation invented an instrument for measuring the water activity of food. Since then, Decagon has been a provider of water activity solutions, and its traceable mirror condensation dew point method has become the industry gold standard. Currently, over 80% of American food companies use Decagon's Aqualab water activity meter.

Decagon provides comprehensive moisture solutions, including Aqualab water activity meters,TrueDry CV9 Fully Automatic Multi Sample Moisture Content Analyzer， Aqualab VSA moisture adsorption analyzer.

AquaLabTrueDry CV9 Multi Sample Moisture Content Analyzer

Bring precision to modern laboratory oven methods.
The moisture content should be measured in this way.
brand newTrueDry CV9 Multi Sample Moisture Content AnalyzerIt only takes 4 minutes to prepare the samples and 40 minutes to wait for the reading time to complete the moisture content analysis of 9 samples.
Operation Method
Before starting the measurement, place each sample on the turntable, close the lid, and select program start.
Set to complete once
Set the drying temperature, drying time, or the constant weight state required to complete the measurement. The sample weight is fully automatically monitored and recorded during the drying process. Only one setting is needed to automatically complete the entire measurement process of moisture content for 9 samples without interruption.

Controllable contact drying
Using the 'controllable contact drying' method, TrueDry directly heats the sample instead of indirectly heating it. The addition of rings and temperature sensors is only a few millimeters away from each sample, allowing for precise temperature control.
Dry to the same standard
At the end of drying, each sample is dried to a relative humidity of 1%. The measurement results are not affected by location and environmental humidity.
Benchmark method
TrueDry uses standard drying weight loss method to achieve high accuracy in oven moisture determination. The testing method complies with AOAC, ASTM, and ISO standards.