Transformer Oil Moisture Tester

Transformer oil moisture detector|Transformer oil moisture analyzerIt's based on1935Annual Carl's Day off（Karl Fischer）The capacity splitting method for measuring moisture proposed has been developed and produced,Transformer oil moisture detectorThe application of microcomputer automatic control technology, using a large screen LCD display, full Chinese menu prompts for operation, rich calculation and printing of experimental results functions, has been internationally listed as the standard method for determining moisture in many substances.Micro moisture analyzerEasy to operate and highly accurate, it is an ideal instrument for testing moisture content in the petroleum, chemical, power, pharmaceutical, pesticide industries and research institutions.http://www.csy17.com/pro567.html

4Transformer oil moisture detectorTechnical products:

1Measurement method: Karl Fischer Coulomb method (electric quantity method)

2Display mode:7A wide screen color touch screen LCD display with Chinese prompts for operation and a friendly and intuitive interface.

3Electrolytic current:0-400mAautomatic control

4、Transformer oil moisture detectorMeasurement range:0.1ppm~100%

5, divided distinguish Rate:0.1μgH2O(0.1ppm)

6accurate true Sex: without injection error: ≤1mgH2OThe error is not greater than the measured value2μgH2O， ＞1mgH2OThe error shall not exceed ± of the measured value0.3%

7Fight seal ： Thermal sensitive high-speed low-noise micro printer print output

8、Transformer oil moisture detectorRecord storage: Storage256records

9Fault self check: automatic fault detection and prompt

10Injection methods: volume injection, weight injection, and dilution injection, with Chinese prompts for inputting various parameters of the sample

11Automatic Conversion: Automatic ConversionPPM, percentage contentmgH2OLAnd its average value

12Display unit: μgH2O、PPM, percentage contentmgH2OL

13, Gong rate ： maximum60W

14Environmental temperature:5℃-45℃

15Environmental humidity: Environmental humidity ≤80%

16External dimensions:350mm×230mm×180mm

17Electricity source ：AC220V±11V 50Hz±2.5Hz

18Weight ：8kg

5Transformer oil moisture detectorMeet the following standards:

1、GB/T7600Method for determination of moisture content in transformer oil during operation(coulometry)》

2、GB6283Determination of Moisture Content in Chemical Products by Karl Fischer Method (General Method)

3、SH/T0246Determination of Water Content in Light Petroleum Products (Electricity Method)

4、SH/T0255Method for determination of moisture content in additives and lubricating oils containing additives (electric method)

5、GB/T11133Method for determination of water content in liquid petroleum products (Karl Fischer method)

6、GB/T7380Determination of Water Content in Surfactants (Karl Fischer Method)

7、GB10670Determination of Trace Moisture in Fluorinated Methanes for Industrial Use by Karl Fischer Method

8、GB/T606Chemical reagents General method for determination of moisture Karl Fischer method

9、GB/T8350Denaturated Fuel Ethanol

10、GB/T8351Ethanol gasoline for vehicles

11、GB/T3776.1Method for determination of moisture content of pesticide emulsifiers

12、GB/T6023Determination of Trace Moisture in Industrial Butadiene by Karl Fischer Coulombic Method

13、GB/T3727Determination of trace water in industrial ethylene and propylene

14、GB/T7376Determination of Trace Moisture in Fluorinated Alkanes for Industrial Use

15、GB/T18619.1Determination of water content in natural gas by Karl Fischer method-coulometry

16、GB/T512Method for determination of moisture content in lubricating grease

17、GB/T1600-Method for determination of pesticide moisture content

18、GB/T11146Determination of Water Content in Crude Oil by Karl Fischer Coulombic Method

19、GB/T12717Test Methods for Acetic Esters for Industrial Use

20、GB/T5074Method for determination of moisture content in coking products

21、GB/T18826industrial1,1,2-Tetrafluoroethane（HFC-134a)

22、Transformer oil moisture detectorMeets the technical requirements of the National Pharmacopoeia for determining the moisture content in drugs using the Karl Fischer method.