TransducerTechniquesRSS series torque sensor RSS-250 Red Image Industrial

TransducerTechniquesRSS series torque sensor RSS-250 Red Image Industrial

Chixiang Intelligent Technology (Shanghai) Co., Ltd. is a one-stop service provider in the field of industrial control automation. As a domestic supplier of industrial spare parts, Red Elephant Industries, headquartered in Berlin, Germany, has a wide range of high-quality European brand supply channels. *The product supply chain covering the European Union, with a wide range of supply brands, low procurement prices, and short logistics cycles, are the three outstanding advantages of Red Elephant Industry.
At present, Chixiang has established long-term friendly cooperative relationships with hundreds of domestic factories, covering fields such as automobile manufacturing, metallurgy (steel mills), tobacco manufacturing (tobacco factories), hydraulic industry, power industry (power plants), petrochemicals, rail transit (high-speed rail, subway), textile industry, paper industry, engineering machinery manufacturing, etc.
Product Features:
Torque of wrench for measuring bolts or nuts
Bi directional sensor
Unlimited spin control

Product Description: How to Translate
Our RSS series rotary socket wrench torque sensor ranges from 10 ft lbs to 250 ft lbs and can measure the wrench torque of bolts or nuts. These sensors are bidirectional and can measure the torque of tightening and breaking. The unrestricted rotation of the sensor shaft supported by ball bearings allows monitoring of the entire tightening cycle. The sensing element uses high-quality bonded foil strain gauges, as well as refined silver slip rings and two silver graphite brushes on each ring to transmit data.


Product Features:
Low range rotary torque sensor
Aluminum foil strain gauges

Product Description: How to Translate
The RST series is our low range rotary torque sensor, with 11 full ranges ranging from 10 to 30K inch pounds. The sensing element adopts high-quality aluminum foil strain gauges, as well as silver slip rings and silver brushes for data transmission. In the dynamic characteristic box below, the values of WR2 flexible natural frequency and torsional stiffness are approximate. The data in the table only involves torque acquisition and does not include the influence of couplings or other rotating masses, which are part of the dynamic system.
TRS torque sensor series: The TRS series reaction force torque sensor has long-term reliability due to the use of non moving parts and advanced thin film strain gauges. The anodized aluminum TRS series can also be used as a dual axis sensor, providing torque and thrust according to special requirements. Whenever possible, the method of torque measurement is through reactive torque sensing, eliminating the high maintenance and cost of slip rings, bearings, and brushes.
Product Model: TRS-2K

SWS Torque Sensor Series: The SWS series reactive socket wrench torque sensor has a range from 10 foot pounds to 1000 foot pounds and can accurately measure the torque of bolts or nuts. These sensors are bidirectional, so they can measure the torque of tightening and breaking. These low-cost sensors have high accuracy and excellent frequency response. This sensor can be used to calibrate mechanical torque wrenches. The sensing element uses high-quality adhesive aluminum foil bandages.
Product model: SWS-10

STS torque sensor series: The STS series is a universal reactive shaft torque sensor. They are typically installed between devices such as motors, switches, shafts, and their mounting plates to provide bidirectional torque output. They have six capacity ranges, from 600 pounds to 12000 pounds, and are made of 17-4ph heat-treated stainless steel. The sensing element includes a high-quality adhesive foil strain gauge and is sealed to withstand most industrial environments.
Product model: STS-600

SSI Handheld Weighing Sensor Display Series: The SSI series is an ultra fast 15360 times/second plug-in intelligent TEDS IEEE 1451.4 compatible handheld weighing sensor. Simply insert a load cell or TorqueSensor compatible with TEDS, and SSI will automatically perform self calibration. When used with non TEDS weighing sensors or torque sensors, SSI can be set through simple front panel buttons. SSI can display numbers ranging from -99999 to+99999 in proportion, directly read in engineering units such as grams, ounces, pounds, pounds, etc. SSI also has a unit key for automatically converting readings of load, torque, and pressure. SSl has an ultra fast signal sampling rate of 15360 samples per second, with true peak and/or valley testing capabilities. At any input signal level, the automatic error correction function allows the instrument to be set to zero. SSl can work for 65 hours on a single charge, or use the included battery charger in SSL installed applications.
Product Model: SSI-AMB

DPM Digital Panel Mounted Load Cell Meter Series: The DPM series is an intelligent plug and play digital panel mounted load thermometer that complies with the TEDS IEEE1451.4 standard. Simply insert a TEDS compatible weighing sensor or torque sensor to automatically perform self calibration. When used with non TEDS weighing sensors or torque sensors, the DPM series can be set through simple front panel buttons.
If a serial communication board is installed, it can be set up using free downloaded software and a computer.
Product models: DPM-3, DPM-2

The signal conditioner series of LCA weighing sensors: The LCA module provides low-cost dedicated signal conditioning for single bridge weighing sensors or torque sensors. The jumper selection on the board includes sensitivity from 05mV/V to 10mV/V, bandwidth from 100Hz to 30kHz, and amplification outputs from 0 to+5V, 0 to: 10V, 0-16mA, 0-20mA, or 4-20mA. Zero and range adjustments are made through a precision 25 turn low-temperature metal film potentiometer. The device can be operated with a 4-wire connection next to the sensor, or with a 6-wire connection within a distance of 1 kilometer (3300 feet).
Product models: LCA-9PC, LCA-RTC

SST High Voltage Weighing Sensor Transmitter Series: SST is a plug and play smart TEDS IEEE1451.4 compatible transmitter. When used with non TEDS weighing sensors or torque sensors, the SST transmitter can be easily programmed using a PC with an RS232 port and Instrument Setup (lS) software, which provides a graphical user interface. SST can be powered by 95-240 Vac: 10%. SST has an isolated sensor excitation output that can be selected between 5VDC or 10Vdc.
Product models: SST-HV, SST-LV
Product Category Introduction:
RST Torque Sensor Series: The RST series is a low range rotary torque sensor with 11 full ranges ranging from 10 to 30K inch pounds. The sensing element adopts high-quality aluminum foil strain gauges, as well as silver slip rings and silver brushes for data transmission. In the dynamic characteristic box below, WR2、 The values of bending natural frequency and torsional stiffness are approximate, and the data in the table only involves torque acquisition and does not include the influence of couplings or other rotating masses, which are all part of the dynamic system.
Product model: RST-A10

RSS torque sensor series: The RSS series torque sensor has a range from 10 foot pounds to 250 foot pounds and can measure the wrench torque of bolts or nuts. These sensors are bidirectional and can measure the torque of tightening and breaking. The unrestricted rotation of the sensor shaft supported by ball bearings allows monitoring of the entire tightening cycle. The sensing element uses high-quality bonded foil strain gauges, as well as refined silver slip rings and two silver graphite brushes on each ring to transmit data.
Product model: RSS-250

RTS torque sensor series: The design of the RTS series torque sensor is to meet the needs of measuring torque below 62.5 inch pounds without sacrificing stiffness or sensitivity to forces in other directions. They are made of sensor quality aluminum and undergo anodizing treatment for long-term durability, and are equipped with high-quality aluminum foil strain gauges and materials to ensure high reliability. Four bolt hole modes, using O.D. or L.D. leads at both ends, can easily adapt to any application.
Product model: RTS-10

TRT torque sensor series: The TRT series reactive torque sensor has long-term reliability due to the use of non moving parts and adhesive foil strain gauges. Whenever possible, the method of torque measurement is through reactive torque sensing, eliminating the high maintenance and cost of slip rings, bearings, and brushes.
Product model: TRT-50