TransducerTechniques sensor RTS-10 red image industrial intelligence

TransducerTechniques sensor RTS-10 red image industrial intelligence

Product Features:
Torque of wrench for measuring bolts or nuts
Bi directional sensor
Unlimited spin control

Product Description: How to Translate
Our RSS series rotary socket wrench torque sensor ranges from 10 ft lbs to 250 ft lbs and can measure the wrench torque of bolts or nuts. These sensors are bidirectional and can measure the torque of tightening and breaking. The unrestricted rotation of the sensor shaft supported by ball bearings allows monitoring of the entire tightening cycle. The sensing element uses high-quality bonded foil strain gauges, as well as refined silver slip rings and two silver graphite brushes on each ring to transmit data.


Product Features:
Low range rotary torque sensor
Aluminum foil strain gauges

Product Description: How to Translate
The RST series is our low range rotary torque sensor, with 11 full ranges ranging from 10 to 30K inch pounds. The sensing element adopts high-quality aluminum foil strain gauges, as well as silver slip rings and silver brushes for data transmission. In the dynamic characteristic box below, the values of WR2 flexible natural frequency and torsional stiffness are approximate. The data in the table only involves torque acquisition and does not include the influence of couplings or other rotating masses, which are part of the dynamic system.

Product Features:
Handheld weighing sensor
Self calibration
Ultra fast signal sampling rate
Automatic compensation function

Product Description: How to Translate
SSL is an ultra fast 15360 sampling/second plug and play smart TEDS IEEE 1451.4 compatible handheld weighing sensor display. Simply insert a TEDS compatible weighing or torque sensor, and SSL will automatically perform self calibration. When used with non TEDS weighing sensors or torque sensors, Ssl can be set through simple front panel buttons. SSL can display 5 digits proportionally between -99999 and+99999 to directly read engineering units such as grams, ounces, and dollars.


Product Features:
Plug and play compatible transmitter
When used with sensors, the user interface can be programmed to output


Product Description: How to Translate
SST-HV is a plug and play smart TEDS IEEE1451.4 compatible transmitter. When used with non TEDS weighing sensors or torque sensors, the SST-HV transmitter can be easily programmed using a PC with RS232 port and Instrument Setup (lS) software, which provides a graphical user interface. SST-HV can be powered by 95-240 Vac: 10%. SST-HV has an isolated sensor excitation output that can be selected between 5VDC or 10Vdc. There are two solid-state relays and an isolated 4-20mA, 0-20mA, or 0-10V analog output. There are three isolated serial data transmitter outputs (RS232, half duplex RS485, full duplex RS485) and three software selectable serial protocols (Modbus RTU, Modbus ASCIl, and Custom ASCIl). Provide 250V rms isolation for power supply, signal input, analog output, relay output, and communication. The excitation output of the transducer is isolated from the signal ground to 50V.
Chixiang Intelligent Technology (Shanghai) Co., Ltd. is a one-stop service provider in the field of industrial control automation. As a domestic supplier of industrial spare parts, Red Elephant Industries, headquartered in Berlin, Germany, has a wide range of high-quality European brand supply channels. *The product supply chain covering the European Union, with a wide range of supply brands, low procurement prices, and short logistics cycles, are the three outstanding advantages of Red Elephant Industry.
At present, Chixiang has established long-term friendly cooperative relationships with hundreds of domestic factories, covering fields such as automobile manufacturing, metallurgy (steel mills), tobacco manufacturing (tobacco factories), hydraulic industry, power industry (power plants), petrochemicals, rail transit (high-speed rail, subway), textile industry, paper industry, engineering machinery manufacturing, etc.Brand Introduction:
An advanced sensor manufacturer in Germany, all sensor sensing elements use advanced metal foil strain gauge technology.

Brand detailed introduction:
Transducer Techniques was founded in 1979, designing and manufacturing complete weighing sensors, torque sensors, special-purpose sensors, and Rer ated instruments. Transducer Techniques' weighing sensors are specifically designed for weight and force measurement in diverse applications such as process control and factory automation. In many fields of science and industry, our load box also has other applications. The sensing element of the aluminum sensor includes bonded metal strain gauges wired in a full Wheatstone bridging configuration.
！