-
Phone
（0）13809890260
-
Address
Room 2503, Block C, Huangdu Plaza, No. 3008 Yitian Road, Futian District, Shenzhen
Product Categories
- Acceleration sensor/gyroscope
- Huarui gas detector
- Honeywell's PPT sensor
- Multi functional verification furnace
- Oxygen and CO2 analyzer
- Angular displacement sensor
- Cable displacement sensor
- Constant oxygen analyzer
- electrochemical gas sensor
- Infrared gas sensor
- trace oxygen analyzer
- Temperature and humidity dew point transmitter
- Portable Dew Point Meter
- Online dew point meter
Shenzhen York Technology Co., Ltd
Trace Oxygen Analyzer 3000 Series
NegotiableUpdate on 02/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Name: Trace Oxygen Analyzer 3000 Series Product Model: Trace Oxygen Analyzer 3000 Series Product Exhibitor: Shenzhen York Technology Co., Ltd. - Gas Analysis and Air Separation Instruments Special Network Continuous Detection of Trace Oxygen Content High precision Electrochemical Sensor for Trace Oxygen Detection of Most Industrial Gases
Product Details
3000 series trace oxygen analyzer
Application:The 3000 series trace oxygen analyzer can continuously detect oxygen concentrations as low as 0.06ppm, suitable for trace oxygen detection of most industrial gases.
| Standard features: |
| 1. Easy to operate, no need for daily maintenance; 2. Oxygen and instrument status sound, light alarm; 3. LCD digital display; 4. Optional RS232 and RS485 interfaces; 5. High precision electrochemical sensors; 6. It can be portable for measurement and panel mounted; 7. Long lifespan of sensors; 8. Waterproof and anti-corrosion enclosures for NEMA4a and 7; |
| Measurement range: (ppm) | Sample gas characteristics |
| Single range and three range 0~10000 0~100/1000/10000 0~5000 0~50/500/5000 0~1000 0~10/a100/1000 0~100 0~5/50/500 0~50 0~1/10/100 0~10 Resolution: 0.1ppm (below 100ppm) 1ppm (higher than 100ppm) Accuracy:+0.1% (full scale) Linear:+0.1% Response time: 90% of full scale takes less than 10 seconds Sensor: Specialized electrochemical sensor Display: 4-1/2 digit LCD display Temperature compensation: standard Operating temperature: 0~+50 ℃ Power supply: 230VAC, 50~60Hz, optional backup battery Output: 4~20mADC and 0~2VDC (standard) Optional RS232 or RS485 interface Alarm relay: Three SPDT Form C interfaces Sound alarm: built-in buzzer |
Flow rate: 1-2 SCFH (0.5~1.0 1/m) Sample gas pressure: 0.1~1kg/cm2 Sample gas temperature: 0~+50 ℃ Dust:<3mg/ft3 without using a filter 3mg/ft3 requires the use of a filter Oil mist:<0.7mg/ft3 without using a filter >0.7mg/ft3 requires the use of a filter Shell: Polycarbonate Host size: 240.5mm (height) 165.1mm (width) 157.5mm (depth) Sampling connection: 1/4 "card sleeve connector Sensor installation: local or optional remote transmission Heavy |
