Tool test temperature control device in stock from Germany

Tool test temperature control device in stock from Germany

Tool Temp Temperature Controller

Temperature control device TT-188 produced by Tool Temp

A small device with * function *, small size but * function *, with a maximum temperature of up to 150 ℃

This small temperature control device with feature * comes with an electronic flow control device, which can be used for water or oil operation, as well as for leak stop mode.

Tool Temp Water Temperature Control Unit

TT-188 series

This small temperature control device with feature * comes with an electronic flow control device, which can be used for water or oil operation, as well as for leak stop mode. Digital flow indication, capable of controlling minimum flow, automatic temperature control - the difference between the set temperature and the actual temperature will activate an alarm for the submersible unsealed pump. A self optimized temperature control unit made of bronze, with digital display of set temperature and actual temperature, and high-precision adjustment within 1/10 degree range; It can be adjusted to read ℃ or ℉ for automatic mold discharge. The Leakstopper device can be used in pressure or vacuum mode. No medium will be lost due to leaked tools, ensuring continuous production with automatic or manual refueling.

Performance parameters:

Scale free heat exchanger.

Due to its non corrosive nature, the device has a long expected lifespan.

All parts in contact with water are made of stainless steel or bronze.

Heating can be switched in stages from 3kW oil operation to 9kW water operation.

Temperature range: Water up to 90 ℃ or oil up to 150 ℃

Temperature control: Self optimizing electronic microprocessor controller MP-888 with digital display of set and actual values. Automatic temperature monitoring

Flow control: Electronic, with digital display and automatic control of minimum flow rate.

Heating capacity: 9kW water operation, can be switched in stages to 3, 6, 9kW. 3kW oil operation.

Cooling capacity: 90 kW/h at 35 ℃

Pump capacity: Motor 0.75kW

Pressure mode: maximum 4.5BAR/min/maximum 751/min

真空模式:最大真空度8 mH20(水柱)

Device capacity: minimum 5 liters/maximum 7 liters

Connection: Medium size, 1/2 'internal thread BSP cooling water, 3/8' external thread BSP

Size: 670mm long x 260mm wide x 650mm high, including casters

Weight: Approximately 55 kg, unloaded

Color: Silver Grey RAL 7001

There are two different levels of liquid level control: warning with indicator light and audible alarm; The device continues to operate. If there is a lack of more liquid, the equipment will stop.

Independent mechanical safety thermostats and electronic temperature limiters are installed in the controller.

Horn for main switch, automatic cut-off, transformer, and motor protection switch failure: liquid level warning alarm is represented by continuous sound, and all other alarms are represented by intermittent sound.

Tool test temperature control device in stock from Germany