Tokyo Keiki Oil Pump SQP31-38-86dc-18

NegotiableUpdate on 05/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SQP31-38-8-86DC TOKYOKEIKI oil pump SQP31-38-8-86dc-18 has a light operating sound and a very low level of noise during operation. There are a total of 4 types, 16 series, and 32 displacements of pump stations in groups 1 to 3. Z optimal displacement combinations can be made according to circuit requirements to achieve an efficient and energy-saving system. By using a combination pump station with different displacements and individual pressure control, the overall circuit can be simplified compared to using a single large displacement variable capacity hydraulic pump. In addition, the system has a large degree of freedom in composition and can also achieve low noise.

Product Details

SQP31-38-8-86DCTokyo Keiki Oil Pump SQP31-38-86dc-18

Brand: TOKYO KEIKI, TOKIMEC

Origin: Japan

Model: SQP31-38-86DC

东京计器TOKYOKEIKI油泵SQP31-38-8-86dc-18

SQP31-38-8-86DCTokyo Keiki Oil Pump SQP31-38-86dc-18

The management points of vane pumps should not only prevent dry running and overload, prevent air intake and excessive suction vacuum, but also pay attention to:

1. If the pump direction changes, its suction and discharge directions will also change. The vane pump has a specified direction and is not allowed to reverse. Because the rotor blade slots are inclined, the blades are chamfered, and the bottom of the blades is connected to the oil discharge chamber, the throttle slots and suction and discharge ports on the oil distribution plate are designed according to the predetermined direction. Reversible vane pumps must be specifically designed.

2. The oil distribution plate and stator of the vane pump should be correctly positioned with locating pins. The blades, rotor, and oil distribution plate should not be installed upside down. The suction area on the inner surface of the stator is most prone to wear. If necessary, it can be flipped and installed to turn the original suction area into a discharge area for continued use.

3. When disassembling, pay attention to the cleanliness of the working surface, and the oil should be filtered well during operation.

4. If the gap between the blades in the blade groove is too large, it will increase leakage, while if it is too small, the blades cannot expand and contract freely, which can lead to abnormal operation.

The axial clearance of the vane pump has a significant impact on η v. 1) Small pump -0.015~0.03mm2) Medium pump -0.02~0.045mm

The temperature and viscosity of the oil should generally not exceed 55 ℃, and the viscosity requirement is between 17-37mm2/s. If the viscosity is too high, it will be difficult to absorb oil; If the viscosity is too low, there will be severe leakage. As a pump product, vane pumps refer more to slide pumps. Almost all blade pumps refer to slide pumps.

F11-SQP21-21-11-1DC-18F11-SQP21-21-11-1DC-18-TF11-SQP21-21-11-86BB2-18F11-SQP21-21-11-86DC2-18F11-SQP21-21-11-86DC2-18-S9814F11-SQP31-25-8-86BB-18-S147BF11-SQP32-30-19-86BB-18F11-SQP32-35-17-86AD29-18F11-SQP3-35-86B-LH-18F11-SQP3-38-86B-18F11-SQP42-42-21-86CC-18F11-SQP432-50-21-14-86DDC-18F11-SQP432-50-38-21-86DBB-18F11-SQP432-60-35-14-86DDC-18F11-SQP43-35-30-86BB-18-S147BF11-SQP43-38-25-86DB-18F11-SQP43-50-38-86BB-18F11-SQP43-60-38-86DD-18F11-SQP43-60-38-86DD-18-S147BF11-SQP43-60-38-86DD-LH-18

SQP31-38-8-86DCTokyo Keiki Oil Pump SQP31-38-86dc-18

Keywords:Tokyo metering oil pumpTOKYOKEIKI oil pump, East American oil pump, TOKIMEC oil pump