Time roughness tester TR200

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction: Beijing Times Roughness Meter, Portable Roughness Meter, Surface Finish Meter

Product Details

Time roughness tester TR200

product overview

This instrument is suitable for production sites and can measure the surface roughness of various machined parts. According to the selected measurement conditions, the corresponding parameters of the computer are displayed clearly on the LCD display, and all measurement results and graphics can be output on the printer or communicate with a PC.

Functional Features

○ High precision inductive sensor

○ Measurable display of 13 roughness parameters

○ Using DSP (Digital Signal Processor) for data processing and control, fast speed and low power consumption

○ Mechatronics design, small size, light weight, easy to use

High quality lithium-ion rechargeable battery with high capacity, no memory effect, and continuous working time greater than 20 hours

○ Connected Era TA series printer, capable of printing measurement parameters and contours

○ Standard RS232 interface, can communicate with PC

○ Optional surface sensor for measuring surfaces, small hole sensor for measuring inner hole walls, groove/deep groove sensor for measuring the roughness of groove bottoms or steps

○ Menu operation mode

○ Has graphic display function

○ Sensor pin position indication

○ Automatic shutdown with storage function

○ Multi language working mode selection

Technical Parameter

Measurement parameters	Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr
measuring range	Ra:0.025-12.5μm
Display Range	Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm，RS、RSm：1mm，Rmr：0-100%（%Rt），Rsk：0-100%
Range of measurement	± 20 μ m, ± 40 μ m, ± 80 μ m
Highest display resolution	0.001μm
Filtering method	RC、PC-RC、GAUSS、D-P
Sampling length	0.25mm、0.8mm、2.5mm、 automatic
evaluation length	1L-5L (optional), L is the sampling length
Measure travel length	3L-7L (optional)
Maximum driving stroke length	17.5mm/0.71inch
Minimum driving stroke length	1.3mm/0.052inch
Indication error	≤±10％
Indication variability	≤6％
Needle tip angle	90°
Display mode	128 × 64 dot matrix LCD (with backlight)
work environment	Temperature: 0oC -40oC, relative humidity:<90%
weight	440g
External dimensions	140×52×48mm

Basic configuration

Host, TS100 standard sensor, power adapter, multi line template, sensor sheath, bracket

Optional Accessories

TS110 surface sensor, TS120 small hole sensor, TS130 groove sensor, TS131 deep groove sensor, TA610 measurement platform, TA620 measurement platform, TA630 fine-tuning platform, TA631 fine-tuning platform, TA230 micro printer, lateral adapter rod, extension rod, V-block, connector component, driver connection shaft, PC software