Tap water quality monitoring system, drinking water quality detector KNF-400

NegotiableUpdate on 10/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The tap water quality monitoring system for pH, turbidity, and residual chlorine - [KNF-400] is a water quality online monitoring system developed based on the relevant requirements of the "Sanitary Standards for Drinking Water", providing a basis and support for strengthening the management of drinking water safety. It mainly targets the turbidity, residual chlorine PH、 The temperature is implemented online and early warning, and the product adopts modular design, which is easy to install and maintain, suitable for monitoring needs of single point and large-scale distribution.

Product Details

execution standard/ Executive standard

The tap water quality monitoring system [KNF-400] is a water quality online monitoring system developed based on the relevant requirements of the "Sanitary Standards for Drinking Water", providing a basis and support for strengthening the management of drinking water safety. It mainly targets turbidity, residual chlorine (or chlorine dioxide or total chlorine) PH、COD、 temperature、The conductivity and other indicators are implemented online and early warning. The product adopts modular design, which is easy to install and maintain, and the later operation and maintenance costs are extremely low, suitable for large-scale deployment.

Meets the following standards:
Sanitary Standards for Drinking Water (GB5749-2006)
National Ministry of Housing and Urban Rural Development's "Technical Standards for Online Monitoring of Urban Water Supply Quality" (CJJ/T271-2017)
Technical Specification for Online Monitoring of Drinking Water Quality by the Health Supervision Association (T/WSJD10-2020)

自来水水质监测系统

Product Introduction/ Product introduction

KNF-400 is a water quality online monitoring system developed based on the relevant requirements of the "Sanitary Standards for Drinking Water", providing a basis and support for strengthening the management of drinking water safety. It mainly targets turbidity, residual chlorine, total chlorine PH、COD、 Temperature, conductivity, TDS and other parameters (optional) are implemented for online and early warning. The product adopts a modular design, which is easy to install and maintain. There are very few consumables for later operation, making it suitable for monitoring needs of single point and large-scale distribution.

At the same time, based on research and development, production, and operation experience in water quality online terminal monitoring equipment, data collection and transmission, and monitoring management cloud, Shenzhen Kenafu can provide long-term, stable, and effective solutions for the monitoring characteristics of drinking water. This system can achieve digital management of the entire process of monitoring and analysis, data collection and transmission, equipment control, monitoring and early warning of drinking water, promoting the informatization and modernization of drinking water management, and comprehensively improving the management level

KNF-400自来水水质在线监测系统

Installation case/ Installation case

自来水水质监测系统适用范围

Product Features/ Features

1. Adopting internationally advanced sensors, stable performance, and long-term online measurement capability
2. High cost-effectiveness, high system stability, built-in seven inch touch screen, user login password can be set, secure login, and the display screen has a large storage capacity that can export data from a USB flash drive. It also has real-time curve drawing, over limit alarm flashing and other functions
3. Integrated structure, small size, suitable for large-scale deployment, can use wired/wireless data transmission methods, adjustable data upload frequency, can upload data to environmental protection departments and users' own cloud platforms in both directions
4. No need for reagents, ultra-low consumption products, ultra-low maintenance and operation costs, strong resistance to electromagnetic interference
5. Modular design, easy to install and maintain, equipped with regulated power supply and backup power supply (can be used for more than 8 hours after power outage)
6. System parameter settings can be carried out on-site; Time setting, range calibration, electronic protection, automatic recovery of incoming calls, and other functions

自来水水质监测系统特点

自来水水质监测系统产品解析

自来水水质监测系统特点

Product Certificate/ Product Certificate

自来水水质监测系统证书

Product Parameters/ PARAMETER

Parameters/Indicators	P H	Turbidity	Chlorine dioxide (or residual chlorine)	temperature	TDS (optional)	Conductivity (optional)	Total chlorine (optional)
Measuring principle	glass electrode method	90 º scattered light type	Film covering method	thermocouple	Conductivity cell method	Conductivity cell method	Film covering method
measurement range	0-14pH	0-10NTU	0-2/5mg/L	0-50℃	0-9999PPM	0-5000µS/cm	0-2mg/L
resolution	0.01pH	0.01NTU	0.01mg/L	0.1℃	1PPM	1µS/cm	0.01mg/L
precision	±0.05pH	≤±0.1NTU	≤0.5mg/L	±0.5℃	1.5%F.S.	1%	≤2%
power consumption	About 0.3W	About 10000	About 0.5W	Inside the electrode	About 0.5W	About 0.5W	About 0.5W
data output	RS485 (Modbus RTU protocol), 4G wireless output, NB, Waiting for options
data reporting	The adjustable reporting time interval can be uploaded to the cloud via GPRS
data storage	The touch screen is equipped with a 128MB data storage chip, which can export data tables from a USB driveAt the same time, the cloud platform can also store and export data tables
display system	7-inch touch LCD display, capable of real-time display of data and curve graphs, historical data and curves, alarm records
maintenance cycle	About 3-6 months, simple cleaning is sufficient
Cloud platform IOT	Equipped with cloud platform monitoring function, alarm, monitoring, WeChat binding and other functions			Product Certification	Having a software registration certificate, ISO9001、ISO14001 、 Measurement and testing report.

xqy7

Kenaf Water Quality Monitoring Cloud Platform/ IoT water quality monitoring cloud platform

自来水水质监测系统云平台

Kenafu Technology's "Water Quality Monitoring Cloud Platform" is an efficient, stable, and secure application platform built between IoT applications and monitoring devices. The main monitoring center provides an intuitive user interface, through which you can manage all devices of your user, such as querying real-time data, historical data, connection status, alarm status, alarm records, real-time positioning, historical trajectory, flow query, switch control, data distribution, and other functions.

Equipment map 物联网云平台设备地图