Taiwan TBI screw support seat FK30

NegotiableUpdate on 04/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Advantages and features: TBI ball screw support seat FK30 can provide sufficient interference fit for the ring that bears rotational loads to prevent this creep

Product Details

Advantages and Characteristics:To prevent this creep, TBI ball screw support seat FK30 can provide sufficient interference fit for the ring that bears rotational loads. When using thin-walled bearings under low load conditions, nuts should be used to secure them. TBI ball screw support seat rings that can withstand static loads generally do not require interference fit. When there is significant vibration during use, both the inner and outer rings require interference fit installation.

FK series (screw support seat fixed seat)

model	Shaft diameter D1	A	F	L	E	Dg6	H	PCD	M	B	L1	T1	L2	T2	X	Y	Z	T	Bearing model

FK30	30	117	32	62	61	75	30	95	M6	93	14	12	17	18	11	17.5	15	40	7206ATYDFC8P5

Shaft end machining dimensions

model

Applicable shaft outer diameter

chamfer

rounded corners

model
FK type

FK30

∅ 40∅50

M30x1.5

0.5

0.6

8x4

23.5

-3

-6

FK30

Repair process of TBI ball screw support seat FK30

The traditional method generally uses welding and machining for repair, but welding can cause the surface of the component to reach a high temperature, resulting in deformation or cracking of the component. Obtaining dimensions through machining greatly prolongs the downtime. The TBI ball screw support seat is repaired on site using polymer composite materials, which have no thermal effect and are not limited in repair thickness. The product's wear resistance and metal material's lack of retreat ensure a 100% contact fit at the repair site, reducing the impact and vibration of the TBI ball screw support seat and avoiding the possibility of wear. On site repair to avoid machining methods.

Usually only four steps are needed:

1. Surface treatment: The surface of the TBI screw support seat FK30 needs to be repaired to remove oil and moisture;

2. Harmonize and repair materials;

3. Apply the material evenly to the repair area of the bearing seat and fill it firmly;

4. Wait for the material to solidify, and heat the surface of the material appropriately to accelerate its solidification.

The wear of the general TBI screw support seat bearing chamber can be repaired in 3-6 hours, with simple and easy to learn operation, no need for special equipment or specialized training, and less time and effort compared to laser welding, cold welding and other technologies. The cost is only 1/5-1/10 of the general repair cost, and on-site repair reduces equipment maintenance time and transportation costs.

To prevent creep, TBI ball screw supports BK30 seat and provides sufficient interference fit for the ring that can withstand rotational loads. When using thin-walled bearings under low load conditions, nuts should be used to secure them. TBI ball screw support seat rings that can withstand static loads generally do not require interference fit. When there is significant vibration during use, both the inner and outer rings require interference fit installation.

To prevent this creep, TBI ball screw support seat FK30 can provide sufficient interference fit for the ring that bears rotational loads. When using thin-walled bearings under low load conditions, nuts should be used to secure them. TBI ball screw support seat rings that can withstand static loads generally do not require interference fit. When there is significant vibration during use, both the inner and outer rings require interference fit installation.