TYH-200FC-B2 Flat Pressure Flat Heat Transfer Printing Machine

Product model:TYT-200FC-B2pressurizationPlanar designthermal transferbronzing machine
One. characteristic:

1. Using a single boardPLCProgrammable controller with high sensitivity,touchTouch screen operation interface，Digitally set parameters,simple and convenient

2. Adopting photoelectric sensing control, high positioning accuracy.

3. Using straight elbowspressurizationCylinder lift type,high pressure,burnMore stable printing effect；

4.The workbench can be adjusted in front, back, left, right, etcRAdjustable angle position; The product alignment adjustment is simple and convenient;
5. The transfer pressure, temperature, and transfer time can be adjusted, and the hot stamping effect is good;
6. Adopting adjustable speed motor for automatic paper feeding, with adjustable speed and time;

7The height of the hot stamping head can be adjusted; The heating tube adopts a surrounding thermal conductivity to maintain uniform temperature of the hot stamping adhesive head.

8. Increase the lifting guide column of the machine to enhance pressure and ensure even pressure distribution; Thickening the film hanger for good balance; The membrane guide rod is a double ear fixed type, and the membrane guide is stable and does not move. The working platform is made of cast iron materialThe tailcoat groove style front and rear, left and right sliding rails are adjustable; Convenient fixture alignment and adjustment;
Two.Parameters:
Hot stamping plate area:200*200MM

Hot stamping panel area:180×180mm
Maximum workpiece height:200mm
Temperature selection range for hot stamping:Room temperature~280℃
Selection range of hot stamping pressure: ≤400kgf
Maximum hot stamping speed:800pcs/hr
heating power:2000W
Gas consumption:0.5-0.7/Pa

Weight:165KG
shapesize:1000800*1900mm