TH2839 Precision Impedance Analyzer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction to TH2839 Precision Impedance Analyzer $r $n $r $n ■ #160; The automatic balanced bridge technology with a wide impedance measurement range is adopted, and its basic accuracy of 0.05% and frequency range of 20Hz-10MHz can meet the measurement requirements of components and materials. It is a powerful tool for electronic component design, inspection, quality control, and production testing. Its excellent performance and functionality provide powerful tools for the design and development of circuits, as well as the research and development of materials (electronic and non electronic). TH2839, with its performance, can achieve various commercial and military standards such as IEC and MIL standards

Product Details

TH2839 Precision Impedance Analyzer

Introduction

The automatic balanced bridge technology with a wide impedance measurement range is adopted, and its basic accuracy of 0.05% and frequency range of 20Hz-10MHz can meet the measurement requirements of components and materials. It is a powerful tool for electronic component design, inspection, quality control, and production testing.

Its excellent performance and functionality provide powerful tools for the design and development of circuits, as well as the research and development of materials (electronic and non electronic). TH2839 can achieve various tests according to commercial standards and military standards such as IEC and MIL standards due to its performance.

TH2839 Precision Impedance Analyzer

application

Passive components: impedance parameter evaluation and performance analysis of capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components, and network components.

Semiconductor components: parasitic parameter testing and analysis of LED driver integrated circuits; C-VDC characteristics of varactor diodes; Parasitic parameter analysis of transistors or integrated circuits

Other components: impedance evaluation of printed circuit boards, relays, switches, cables, batteries, etc

Evaluation of dielectric constant and loss angle of dielectric materials: plastics, ceramics, and other materials

Magnetic materials: evaluation of permeability and loss angle of ferrites, amorphous and other magnetic materials

Semiconductor materials: dielectric constant, conductivity, and C-V characteristics of semiconductor materials

Liquid crystal cell: C-V characteristics such as dielectric constant and elastic constant

Product model		TH2839
display		7-inch TFT LCD display 800 x RGB x 600
AC measurement parameters		Cp/Cs、Lp/Ls、Rp/Rs、\|Z\|、\|Y\|、R、X、G、B、θ、D、Q、Vac、Iac、
DC measurement parameters		Rdc、Vdc、Idc
test frequency	scope	20Hz-10MHz
Test voltage level	Zui Highresolution	1mHz
	AC voltage	20Hz—2MHz：5mV—2Vrms,2MHz—10MHz：5mV—1Vrms
	resolution	100uV
	AC current	20Hz—2MHz：50uA—20mArms,2MHz—10MHz：50uA—10mArms
	resolution	1uA
	DC voltage	100mV—2V
	resolution	100uV
DC bias	voltage	0V—±40V
	Voltage resolution	100uV
	current	0mA—±100mA
	current resolution	1uA
DC voltage source	voltage range	-10V—10V
	current range	-45mA—+45mA
	output impedance	100Ω
Test end configuration		Four end pairing
output impedance		100Ω
Typical measurement time (speed)		Fast: 7.7ms/session Medium: 120ms/session Slow: 230ms/session
Zui Highaccuracy		1kHz：0.05%, 1MHz：0.05%, 2MHz：0.1%, 5MHz：0.5%
cable length		0 meters
Multi functional parameter list scan		201 points, scanning parameters: test frequency, AC voltage, AC current, DC BIAS voltage, DC BIAS current
Graphic scanning	parameter	Frequency, ACV, ACV/I, DCV/I, DC voltage source
	type	Logarithmic, linear
	points	51, 101, 201, 401, 801 points are optional
Equivalent Circuit Analysis		Purchase upper computer software
interface		USB HOST、USB DEVICE、LAN、HANDLER、RS232C，SCANNER、 Temperature input sensor, optional: GPIB
Power on preheating time		60 minutes
input voltage		100-120VAC/198-242VAC, Optional, 47-63Hz
power consumption		80VA
Size (WxHxD) mm3		400 x 132 x 425
weight		About 15kg

Technical specifications

Attachment

standard configuration
Accessory name	model
Four end card clamp	TH26005C
fixture	TH26047
Short circuit chip	TH26010
Kelvin test line with box four end insulation and lock	TH26011BS

optional
Accessory name	model
Magnetic ring fixture	TH26008A
Box mounted patch testing line	TH26009B