TH2817CX Filter Balance Tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TH2817CX Filter Balance Tester $r $n Introduction $r $n ■ #160; TH2817CX is an expandable LCR tester developed specifically for efficient comparative testing of balanced devices. By measuring two devices simultaneously at once, it is easy to compare and test balanced devices, such as integrated voltage divider resistors, balanced capacitors, and common mode filters. Especially for common mode filters, it also has DCR balance testing function. This instrument can provide a measurement speed of 20 times per second, a ten point testing frequency of 50Hz-100kHz, three commonly used typical testing levels, 5-digit reading resolution, and two

Product Details

TH2817CX Filter Balance Tester

Introduction

TH2817CX is an expandable LCR tester developed specifically for efficient comparative testing of balanced devices. By measuring two devices simultaneously at once, it is easy to compare and test balanced devices, such as integrated voltage divider resistors, balanced capacitors, and common mode filters. Especially for common mode filters, it also has DCR balance testing function. This instrument can provide the fastest measurement speed of 20 times per second, with a ten point test frequency of 50Hz-100kHz, three commonly used typical test levels, 5-digit reading resolution, and two source internal resistance options. Equipped with comprehensive communication and control interfaces, it can meet the measurement requirements of production line quality assurance, incoming inspection, and component design and evaluation.

Multiple communication interfaces: This instrument provides Handler, RS232C, GPIB interface functions, which can easily communicate with computers and flexibly form automatic testing systems and lines.

Convenient parameter storage and retrieval: This instrument can save 12 sets of test parameters and automatically retrieve the saved parameters currently in use when turned on, eliminating the hassle of duplicate settings.

Practical Transformer Testing Capability: This instrument has the ability to test transformers using specialized transformer testing fixtures. It can easily measure turns ratio (N, 1/N), mutual inductance (M), primary inductance (L2A, L2B), primary DC resistance (DCR, R2) without changing the testing line method. The instrument can also provide adjustable bias voltage of -5V -+5V or a large DC bias current of 50mA, which can be conveniently used for testing communication transformers and low-power chokes.

Balance testing function: This instrument can conveniently compare and test balance devices (such as integrated resistive dividers, balance capacitors, common mode filters, etc.).

TH2817CX Filter Balance Tester

application

Technical specifications

measurement function
test parameters	LCR	\|Z\|、R、X、C、D、L、Q、θ（deg）、θ（rad）
	transformer	M，N，1/N，L2，DCR2，DCR
	Balance testing	L、C、R、Z、DCR2
Basic accuracy		0.1%
equivalent circuit		series connection, parallel connection
Mathematical functions		Value deviation, percentage deviation
Range method		Automatic, hold, manual switching
trigger method		Internal, manual, external, bus
measure time		Fast: 20 times/second, medium speed: 8 times/second, slow speed: 2 times/second
average frequency		1—99
Calibration function		Open/short circuit point frequency, full frequency reset
Test end configuration		Five ends
display mode		Direct reading, Δ，Δ%
monitor		240 × 64 dot matrix LCD display with 5-digit resolution
test signal
Test signal frequency		十点： 50Hz,60Hz,100Hz,120Hz,1kHz, 10kHz,20kHz,40kHz,50kHz,100kHz
output impedance		30Ω, 100Ω
Test signal level		0.1Vrms，0.3Vrms，1Vrms
DC bias source		Fixed: ± 2V, adjustable from 0 to ± 5V, adjustable from 0 to ± 50mA
Measurement display range
\|Z\|、R、X		0.0001Ω — 99.999MΩ
C		0.001pF — 99999μF
L		0.001μH — 99.999kH
D		0.0001 — 9.9999
Q		0.0001 — 99999
θ（deg）		-179.99° — 179.99°
θ（rad）		-3.1416 — 3.1416
Δ%		-99.999% — 99.999%
N，1/N		0.001 — 999.99
DCR		0.01mΩ — 1.9999MΩ
M，L2		0.001μH — 99.99kH
Comparator and interface
comparator		Five levels (three levels qualified and one level unqualified), and one additional level (AUX)
存储器		12 sets of internal instrument settings for storage/retrieval
interface		RS-232C, Handler, GPIB (optional)
General technical indicators
Working temperature and humidity		0℃ — 40℃，≤90%RH
Power requirements		198 — 242V AC，47.5 — 52.5Hz
power consumption		≤30VA
Volume (W × H × D)		350mm×120mm×435mm
weight		About 4kg

Attachment

standard configuration
Accessory name	model
Four end fixture	TH26005A
2817CX fixture	TH26049
Short circuit chip	TH26010
Kelvin test line with box four end insulation and lock	TH26011AS

optional
Accessory name	model
Box mounted patch testing line	TH26009B
Box mounted patch testing line	TH26029B