TELE-880 Street Lamp Cable Fault Tester

TELE-880 Street Lamp Cable Fault Tester

Product Introduction:

Normal version: (220V voltage) length test+leakage test. Use when knowing the direction of buried cables. Suitable for testing particularly obvious wire breakage and short circuit faults; Minor leakage (non tripping) fault

Enhanced version: Length testing+leakage testing: Significant breakthrough in functionality: the disconnection point can be accurately located and fixed; The ground leakage, external armor leakage, phase wire breakage, and short circuit of the cable can also be tested; Serious leakage fault when unable to deliver electricity

Armor specific type: length test+leakage test+path search (based on the enhanced version, the signal generator power is increased to make the signal stronger; equipped with a dedicated probe signal acquisition, more convenient;) In addition, this armored cable is suitable for all types of cables with resistance values less than 500K and voltage less than 380V

Enhanced version (with armor) (T-880 tester+high-power signal generator+dedicated probe)

Attention: This tester is only suitable for low voltage cables and communication cables below 380V, and is not suitable for high voltage cables

The high-voltage enhanced upgraded version is suitable for high voltage faults of 10 kV. This version is suitable for various high-power wire and cable faults in engineering schools, enterprises, and has high accuracy, simple operation, convenient and fast technical telephone and video guidance

TELE-880 Street Lamp Cable Fault Tester

Length test+leakage test

Using ARM technology and FAGA technology for one click automatic and fast testing, there is no need to wait for a long time, and the test results are intuitive and clear! Adopting a large screen true color LCD display

Suitable for accurately locating faults such as broken wires, mixed wires (short circuits), and leakage in low-voltage power cables. It is a powerful tool to shorten the time for fault diagnosis, improve work efficiency, and reduce the labor intensity of line maintenance personnel. Line maintenance personnel can also be used for line engineering acceptance and inspection of cable electrical characteristics. Fill the gap in the lack of corresponding instrument testing for rural power failures and community power supply failures.

Product features:

Length testing unit:

Pulse reflection testing method can be used to test the distance of faults such as broken wires, mixed wires (short circuits), and severe poor insulation;

Fully automatic testing, intelligent fault diagnosis, fully Chinese operation menu, LCD display with backlight function;

Automatic gain and automatic impedance balancing technology, replacing tedious potentiometer adjustment;

• Manual analysis function, convenient for analyzing and judging cables;

Rechargeable lithium battery, intelligent charging, no need for on duty.

Pulse reflection testing method: large measurement range of 2km, testing resolution of 1m, testing blind zone of 0m,

Pulse width: automatically adjustable from 80ns to 10 μ s.

Leakage testing unit:
Intelligent fault diagnosis, assisting in headphone audio judgment;

• Strap bag design, convenient to carry around;
For faults caused by leakage that result in inability to supply power, testing can be conducted;

Test cable burial depth not exceeding 3 meters;

Test accuracy: detection error ± 5cm;
Other refers to:

The charging time is about 3 hours, and the continuous working time after being fully charged is 8 hours;

• Volume: 230 × 150 × 160mm, weight: 2Kg.

• Working temperature: -15~50 ℃
• Storage temperature: -25~60 ℃
• Humidity: 95% (non condensing)
Waterproof: IEC60529 IP02, international waterproof standard
• Vibration performance: arbitrary, 2 kg, 5-500HZ
• Impact strength: Landing at a height of 1 meter
• Working height: 4500 meters

Packing list:

One host

One charger (for the host)

Test one lead wire

Two transmission lines

One earphone

Collect two pedals

One user manual