TBI screw support seat FF series

NegotiableUpdate on 04/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Advantages and features: To prevent creep, the TBI screw support seat FF series can provide sufficient interference fit for the trap that can withstand rotational loads

Product Details

Advantages and Characteristics:To prevent this creep, the TBI screw support seat FF series can provide sufficient interference to the trap that can withstand rotational loads. When using thin-walled bearings under low load conditions, nuts should be used to secure them. The support unit on the TBI ball screw support seat side uses deep groove ball bearings. The internal bearings are filled with an appropriate amount of lithium soap based grease and sealed with special sealing gaskets, which can be directly installed and used for a long time.

TBI screw support seat cleaning

When disassembling and inspecting the TBI screw bearing seat, first use photography or other methods to make a good appearance record. In addition, it is necessary to confirm the amount of remaining lubricant and sample the lubricant before cleaning the bearings.

a. The cleaning of TBI screw bearing seat is divided into coarse cleaning and fine cleaning, and a metal mesh can be placed at the bottom of the container used.

b. During rough cleaning, use a brush or other tool to remove lubricating grease or adhesive from the oil. If the TBI screw bearing seat is rotated in oil at this time, be careful not to damage the rolling surface due to foreign objects or other factors.

c. When performing precision cleaning, slowly rotate the bearing in oil, and it must be done carefully.

The commonly used cleaning agents are neutral, water free diesel or kerosene, and sometimes warm alkaline solutions are also used as needed. Regardless of the type of cleaning agent used, it is important to filter regularly to maintain cleanliness.

After cleaning, immediately apply rust proof oil or grease to the TBI ball screw support seat bearing.
Installation of TBI screw support seat

TBI screw support seat motor connection

1. Accurate connection of motor base

2. Installation of motor seat, ball screw and coupling.

3. Motor continuous rotation test after installation.

TBI screw shaft end machining dimensions

TBI-FF series screw support seat model

FF10 FF12 FF15 FF20 FF25 FF30