-
E-mail
1421506823.qq.com
-
Phone
18824524163
-
Address
No. 3, Pailou Ji Education Road, Wanjiang Street, Dongguan, Guangdong
Product Categories
Dongguan Geyang Electromechanical Equipment Co., Ltd
TBI Rotary Ball Spline \ RLSF016
NegotiableUpdate on 07/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Advantage features: Taiwan TBI rotary ball spline RLSF016, spline diameter 16mm, installation hole distance 30mm
Product Details
Advantages and Characteristics:The Taiwan TBI rotary ball spline RLSF016 has a spline diameter of 16mm and a mounting hole distance of 30mm. The shaft spline function of TBI ball spline is a high-speed, low support rotating body, so its dynamic balance is crucial. Generally, the transmission shaft needs to undergo a dynamic balancing test before leaving the factory and be adjusted on the balancing machine.
| model | axle footpath d |
through-hole diameter d1 |
roll bead arrange |
Support bearing Rating |
Spline bearing sleeve size | ball nut Rating |
|||||||||||||
| Ca （kgf） |
Coa （kgf） |
D | A | B | L | C | E | J | K | P | X | W | Y | Ca （kgf） |
Coa （kgf） |
||||
| RLSF 016 |
16 | 8 | 2 | 730 | 1484 |
-0.009 48 -0.025 |
64 | ±0 36 -0.025 |
50 | 31 | 10 | 6 | 21 | 56 | 4.5 | 30 | M4 | 545 | 849 |
The TBI ball spline RLSF016 shaft has two series of tooth profile dimensions specified in the standard, namely the light series and the medium series, depending on the tooth height. The load-bearing capacity of the light series is relatively low, and it is mostly used for static or light load connections; The medium series is used for medium loads.
The centering method for rectangular splines is small diameter centering, where the small diameter of the external and internal splines serves as the mating surface. Its characteristics are high centering accuracy, good centering stability, and the ability to eliminate deformation caused by heat treatment through grinding. Rectangular spline connection is the most widely used spline connection. Widely used. Such as aviation engines, automobiles, gas turbines, machine tools, construction machinery, tractors, agricultural machinery, and general mechanical transmission devices, etc.
The tooth profile of the involute TBI spline shaft is involute, and there are two types of pitch circle pressure angles α: 30 ° and 45 °. The involute spline can be processed using the method of manufacturing gears, which has good processability and is easy to achieve high manufacturing accuracy and interchangeability.
The centering method of the involute TBI spline shaft RLSF016 is tooth profile centering. When loaded, there is a radial force on the teeth, which can automatically center the teeth and promote uniform force distribution, high strength, and long service life. Used for connections with large loads, high centering accuracy requirements, and large dimensions, such as aviation engines, gas turbines, automobiles, etc. Splines with a pressure angle of 45 ° are commonly used for connecting light loads, small diameters, and thin parts.
The Taiwan TBI rotary ball spline RLSF016 has a spline diameter of 16mm and a mounting hole distance of 30mm. The shaft spline function of TBI ball spline is a high-speed, low support rotating body, so its dynamic balance is crucial. Generally, the transmission shaft needs to undergo a dynamic balancing test before leaving the factory and be adjusted on the balancing machine.
