Welcome Customer !

Membership

Help

Beijing Huayang Future Network Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Beijing Huayang Future Network Technology Co., Ltd

  • E-mail

    gcwl@163.com

  • Phone

    13301328812

  • Address

    Room 8A12, Huajie Building, No. 13 Dazhongsi, Haidian District, Beijing

Contact Now

T-336Cx dedicated line MODEM

NegotiableUpdate on 10/31
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The T-336 series MODEM is a high-performance, synchronous/asynchronous, full duplex/half duplex, multi standard MODEM that can operate on two-wire dial-up lines and two-wire/four wire dedicated circuits

Product Details

The T-336 series MODEM is a high-performance, synchronous/asynchronous, full duplex/half duplex, multi standard MODEM that can operate on two-wire dial-up lines and two-wire/four wire dedicated circuits. The T-336 series not only provides security checks for dial-up internet access, but also offers security checks for automatic fallback and leased lines. The TRS16 rack can accommodate up to 16 data machine cards, including 16 ports, control units, and single or dual redundant power supply units. If one power source fails, the other power source can provide power to the entire rack.
⊙ T-336Cx desktop style
⊙ T-336Nx single channel card, can be used for Taiwan Union TRS-16 chassis
⊙ T-336NDx dual channel card, can be used for Taiwan Union TRS-32 chassis

Product Features

Fully compatible with ITU-T V.34+/V.34/V.32bis/V.32/V.22bis/V.22/
V.23/ V.21/ V.24/ V.28/ V.25bis / V.54/ V.52/
V. 42/ V.42bis/ V.14/ V.13/ V.8 and Bell 212A/103
The 19 inch rack can accommodate up to 16 data machine cards for hot swapping and configuration file copying
The data flow rate is as high as 115200bps
V.13 Half Duplex Analog Carrier
MNP4, V.42 error correction
MNP5, V.42bis data compression
Expand AT and ITU-T V.25bis command sets
Dedicated line dial-up backup and manual or automatic mode recovery
Automatic acceleration and deceleration function
Remote configuration through auxiliary channels
Front panel locking and password protection
Password and call back security
Diagnostic functions: analog loop, digital loop, and remote/digital loop; Use test signal 511
Automatic or manual dialing/answering
Configure through the front panel buttons and LCD
Front panel button reset function
G3 fax sending/receiving, compatible with EIA-578 Level 1 fax commands (optional)

Specifications

versatility
V.34+: 33.6/31.2 Kbps SM (4D TCM)

V.34: 28.8/26.4/24/21.6/19.2/16.8/14.4/12/9.6/7.2/4.8/2.4 Kbps SM (4D TCM)

V.32bis: 14400/12000/7200 bps TCM

V.32: 9600 bps TCM, 9600/4800 bps QAM

V.22bis: 2400 bps QAM, 1200 bps BPSK

V.22/Bell 212A: 1200 bps DPSK

V.23: 1200/75, 600/75 bps FSK

V.21/Bell 103: 300 bps FSK

data format

Synchronous or asynchronous

Total bit length: 8, 9, 10, 11

Data transmission speed

Asynchronous

75/300/600/1200/2400/4800/7200/9600/12000/14400/16800/19200/

21600/24000/26400/28800/31200/33600/38400/57600/76800/ 115200 bps

Synchronize

1200/2400/4800/7200/9600/12000/14400/16800/19200/21600/ 24000/26400/28800/31200/33600 bps

DTE interface

.EIA RS-232C, ITU-T V.24/V.28

Line requirements

Telephone line, 2-wire/4-wire dedicated line

Sending level

Telephone line: 0 to -15 dBm;

Dedicated line: 0 to -31 dBm

Receive dynamic range

.-4 to -43 / 0 to -33 dBm

balance

Automatic adaptive equalizer

Call process monitoring

Dialing tone, ringing tone, ringback tone, busy tone, and dialing backup

Line status monitoring

Transmission level, reception level, S/N ratio, EQM value, delay, phase jitter, frequency offset, remote frequency offset, remote echo, DTE format, re adaptation count, transmission baud rate, reception baud rate, transmission carrier, reception carrier, transmission speed, reception speed, transmission power fallback level, LED interface monitoring

memory

Non volatile; 10 sets of user profiles and 10 30 character phone numbers

Line interface

Model CX/NX: RJ-11 is used for dialing, JM8 (such as RJ45) is used for dedicated lines
Model NDX: 6-pin terminal block or 50 pin Centronic

Send clock

Internally, looped, or externally

Dialing commands and types

Expand AT and use audio/pulse/hybrid V.25bis

flow control

.RTS/CTS, XON/XOFF, CTS

Power requirements

.AC: 90 ~ 265 V, 47 ~ 63 Hz
. DC: -36~-72 V or -12~-36 V (optional)
. 90~265 VAC&110 VDC (optional)
Dual power backup module for rack mounted (optional)

Dimensions and Weight

Desktop computer: 180W x 48H x 262D mm; 1.9 Kg
Rack mounted: 480W x20H x 380D mm (rack); 0.6 Kg (board)

operating environment

Operating temperature: 0 ° C~50 ° C, storage temperature: -25 ° C~70 ° C
Relative humidity: up to 95% (non condensing)

Product Application