- Phone
-
Address
Building 6, Optics Valley Electromechanical Industrial Park, No. 84 Gaoxin 5th Road, Donghu New Technology Development Zone, Wuhan City, Hubei Province
Product Categories
Wuhan Ultra High Voltage Power Technology Co., Ltd
Switchgear without partial discharge simulation test device
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The switchgear without partial discharge simulation test device is used for insulation state detection and evaluation of high-voltage switchgear, ring main unit, transformer, GIS and other equipment
Product Details
Switchgear without partial discharge simulation test deviceThe testing bandwidth range is 30kHz~2.0GHz; Provide various discharge spectra such as time-domain waveform, PRPD, PRPS, etc; Adopting non-invasive detection methods, there is no need to cut off power during the testing process.
This product is a fully automatic power frequency withstand voltage testing equipment produced by our company. The control system has the characteristics of easy operation, good performance, safe and reliable use, beautiful appearance, durability, and easy mobility. It is a commonly used equipment for power maintenance departments in power supply enterprises, large power enterprises, metallurgy, power plants, railways, and other industries.
This product adopts microelectronic chip processing technology, touch screen control, and keyboard and mouse operation, with simple and clear operation. After setting all test parameters, automatic testing is carried out without manual intervention.
Other name: No partial discharge power frequency withstand voltage test device, no partial discharge withstand voltage tester, fully automatic no partial discharge withstand voltage test device
Product Parameters
Switchgear without partial discharge simulation test devicetechnical parameters
| parameter | value |
| rated voltage | 30kV |
| Rated capacitance | ≤100pF |
| Rated capacity | 3kVA = 65374;20kVA |
| Test frequency | 30Hz～300Hz |
| input voltage | 0～220V |
| Instrument voltage | 0～100V |
| Partial discharge level | ≤1PC |
| Power frequency withstand voltage level | 30kV/1min |
| Simulated discharge type | Sharp discharge, particle discharge, surface discharge, air gap discharge, suspension discharge |
Note:
1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued.
2. For more information on ultra-high voltage products, please enter the product center.
Product features
1. Good authenticity: Designed according to the physical switchgear, it realistically simulates various partial discharge faults inside the switchgear.
2. Fault simulation: It can simulate discharge types such as switchgear terminals, suspensions, air gaps, particles, and along surfaces, and multiple discharges can be generated in combination.
3. Controllable discharge: The type of discharge can be freely selected, and the starting voltage, extinguishing voltage, and discharge intensity of each discharge signal can be controlled.
4. Diversified detection: It can provide a testing platform for technology detection such as pulse current, ultra-high frequency, ultrasonic, transient ground voltage, etc.
5. Measurement transmission: Built in pulse current method related coupling and verification units can synchronously detect the partial discharge level of experimental devices as the basis for instrument assessment.
6. Good stability: Each discharge module can be reused, and the discharge characteristics are stable.
7. Visualization: Built in infrared video probe, convenient for observing internal status and capturing discharge videos.
8. Easy to operate: The occurrence and disappearance of various faults can be directly controlled outside the device.
9. Safe and reliable: The boosting equipment is built-in, with high voltage isolated from the outside world, ensuring safe and reliable operation.
