Suzhou Tuobo THD-8203S Foam Compression Resistance Testing Machine

Product Name:Suzhou Tuobo THD-8203SFoam compression resistance testing machine

Product New Feature Function Description:

1. It can achieve integrated operation of computer control, communicate with external resistance meter and software, and collect resistance values in real-time

2. Special insulation foam compression testing fixture, equipped with a leveling pressure plate, to ensure the flatness of compression testing and conductivity issues in resistance testing:

3. Specialized testing software can achieve automatic zero point finding function

4. Specialized testing software can be used to set the resistance compression ratio test results,

5、The test curve can be achievedForce height, force time, height time, resistance force, resistance/force compression ratio, resistance/force heightanalyze

6. Software dual coordinate display, curve can provide real-time feedback on the corresponding relationship between each displacement point and resistance value data

7The test results can be displayed at multiple points as required in the report

Product Overview:

Suzhou Tuobo THD-8203SFoam compression resistance testing machineDuring the test, the full digital force, displacement and speed three closed loop control is adopted, and the AC servo motor and control drive system of Taiwan, China are adopted, in cooperation with ItalyHaitecReducer and Taiwan, ChinaTBIPrecision ball screw transmission is used to achieve transmission efficiency and signal-to-noise ratio.

This testing machine mainly tests precision mechanical tests such as compression, tension, peeling, and tearing of foam, rubber, and other samples.At the same time, according toGBTheISOTheJISTheASTMTheDINConduct experiments and data processing using various standards provided by users.

Technical specifications:

1. Test force selection: 1kgThe2kgThe5kgThe10kgThe20kgThe50kgThe100kgThe200kg; (optional)

2. Accuracy level:0.5Grade;

3. Load measurement range:0.2%—100%FS；

4. Allowable error limit of test force indication: ±0.5%Within;

5. Resolution of test force indication: maximum test force1/±500000；

6. Sampling frequency:400time/Seconds;

7. Deformation measurement range:0.2%—100%FS；

8. Limit of deformation indication error: indication of±0.50%Within;

9. Deformation resolution:0.0001mm

10. Limit of displacement indication error: ±0.5%Within;

11. Displacement resolution:0.0005mm

12. Displacement speed adjustment range:0.001-500mm/min

13. Displacement rate control accuracy: rate<5mm/minWhen setting the value ±1%Within; Speed ≥5mm/minWhen setting the value ±0.5%Within;

14. Constant force, constant deformation, constant displacement control range:0.5%--100%FS；

15. Constant force, constant deformation, constant displacement control accuracy: set value ≥10%FSWhen setting the value ±0.1%Within; set value<10%FSWhen setting the value ±1%Within;

16. Effective test width:150mm

17. Effective stretching of spatial distance:650mm

18. Host dimensions (length x width x height):450×400×1250（mm）

19. Power supply: single-phase220V 50Hz 500W；

20. Machine weight: approximately55kg；

JK2516BTechnical parameters of DC low resistance tester

1. Test scope:1uΩ-20 kΩ

2. Basic accuracy:0.05%

3. Number of reading digits: maximum115000Number display digits

4. Range mode: self metformin, hold, manual selection

5. Calibration function: short circuit reset, zeroing, load correction

6. Range testing range:20 mΩ-20 kΩ

7. monitor:24The true color resolution is480*272ofTFT LCD

Functional features:

1 *Chip integration technology, professionally designed data acquisition and amplification system, has the advantages of high integration, stability and reliability, and easy use. The control software can automatically calculate tensile strength, yield strength, compressive strength, fracture strength, peel strength, elastic modulus, elongation, force and resistance meter, and other testing parametersData, open formula editing can automatically calculate the force, stress, displacement, deformation and other data results at any point during the experimental process. The control and data processing of the experimental process comply with the requirements of the corresponding national standards for metallic and non-metallic materials.

2 Control method:Control methods such as constant speed, positioning displacement, constant load, constant load rate, constant stress, constant stress rate, constant strain, and constant strain rate can be selected；

3 Automatic zeroing: After the experiment begins, the measurement system automatically resets to zero;

4 Automatic shifting: automatically switches to the appropriate range according to the load size to ensure the accuracy of measurement data;

5 Automatic saving: Test data and conditions are automatically saved to prevent data loss caused by forgetting to save them;

6 Batch test: For samples with the same parameters, a batch of tests can be completed sequentially after one setting;

7 Display mode: Data and curves are dynamically displayed during the experimental process;

8 Curve traversal: After the experiment is completed, the curve can be reanalyzed by using the mouse to find the data corresponding to each point on the experimental curve;

9 Curve selection: selectableForce height, force time, height time, resistance force, resistance/force compression ratio, resistance/force heightDisplay and print curves;

10Unit switching: Force units: (g, kg, N, lb), stress units: (kg/mm2, N/mm2, Mpa, lbf/in2)

Displacement unit:（mThemmThein）Resistance unit:（MOh,kOh, oh,mΩ)

11Test result setting for resistance compression ratio:Compression ratio starting point, compression ratio ending point, compression ratio increment;

12Test report: The test report can be programmed and printed in the format required by the user, and can be exported as WORD, EXCEL, or PDF files;

13Test data: Powerful result data query function, allowing historical test records to be queried at any time through the database;

14Security protection: When the maximum load exceeds 2-10%, automatic security protection is implemented;

15It can automatically detect and calculate the mechanical performance indicators of the sample, and can also manually intervene in the analysis process. According to the requirements of relevant standards, the automatic analysis results can be corrected to improve the accuracy of the data;