Suspended solids/sludge concentration sensor

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The WTF402 digital suspended solids/sludge concentration sensor adopts the ISO7027 standard method and is based on the design concept of digital and intelligent sensors. It can automatically compensate for the influence of light source intensity fluctuations, temperature changes, and other factors on the measured values. Directly outputting standardized digital signals enables networking and system integration without the need for a controller. Widely used in industries such as surface water and pollution sources.

Product Details

1、 Product Overview

WTF402numbersuspended solids/Sludge concentration sensor, adopting complianceISO7027The standard method, based on the design concept of digital and intelligent sensors, can automatically compensate for the influence of light source intensity fluctuations, temperature changes, and other factors on the measured values. Directly outputting standardized digital signals enables networking and system integration without the need for a controller. Widely used in industries such as surface water and pollution sources.

2、 Product Features

lThe system is very stable, and the electrode life is twice as long as that of ordinary industrial electrodes；

lRS485Signal output, standardModbusProtocol for easy integration and networking；

lIP68Waterproof grade, suitable for various working conditions；

lThe cleaning brush automatically cleans, greatly reducing maintenance workload

lBuilt in light source intensity reference detection, not affected by light source attenuation

3、 Technical data

Suspended solids/sludge concentration sensorTechnical Specifications

■	model	WTF402
■	measurement parameters	suspended solids/sludge concentration
■	measurement method	Infrared scattering method
■	measurement method	Immersion measurement
■	range	0-8000mg/L
■	accuracy	≤±5%
■	repetitiveness	≤3%
■	resolution	0.1mg/L
■	response time	≤10s
■	Drift（24h）	≤±3%F.S.
■	calibration cycle	6month
■	Protection level	IP68
■	Cleaning Method	Mechanical brush automatic cleaning
■	MTBF	≥1440h/time
■	contact method	RS485(Modbus RTU)Maximum baud rate115200 bps
■	power supply/power consumption	(12～28)V DC/0.4W
■	material	stainless steelS316L+POM
■	weight/size	1000g/198mm× φ50mm

4、 Typical applications

Monitoring of polluting enterprisesStation building：

lwater qualityFive parameters（temperaturepHDissolved oxygen, conductivity, turbidity）

lTotal Phosphorusonline analyzer

lAmmonia nitrogen online analysis

lCODonline analyzer

lTotal nitrogen online analyzer

ldata acquisition instrument（Upload toEnvironmental Protection Bureau Data Center

lCustomized water procurement and distributionsystem

lMonitoring station building and supporting facilities